Well,
I don't understand what's going wrong with your system.
I can confirm that both 3.3.8-gentoo and current Squeeze kernels are
booting fine on my zx6000.
Did you try to rebuild Squeeze kernel using 3.3.8-gentoo .config file?
Emeric
2012/10/4 Bettoni Fabio <[email protected]>:
>
> Hi,
>
> I tried to boot gentoo install-ia64-minimal-20121002.iso
>
> It uses 3.3.8-gentoo and it boots almost correctly (didn't get login prompt
> and waiting a lot on acpi staff)
>
> So I think there's something different between configs.
>
> Do you have an idea ? Can you help me ?
>
> Fabio
>
>
> Loading.: Internal Bootable DVD
> Starting: Internal Bootable DVD
>
> Welcome to the Gentoo/IA64 LiveCD!
>
> To boot the CD with default options type 'gentoo' or hit the Enter key.
> To boot, forcing a serial console on ttyS0 at 9600bps type 'gentoo-serial'.
> To boot, if you're using iLO remote console, type 'gentoo-ilo', which
> forces a serial console on ttyS3 at 9600bps.
> To boot, if you're using an SGI system, type 'gentoo-sgi', which
> forces a serial console on ttySG0 at 115200bps.
>
> You may add extra arguments to either to modify the boot options.
>
> Please report any issues to <[email protected]>!
>
> For further information on Gentoo/IA64 installation please see the
> IA64 installation handbook.
>
> ELILO boot: Uncompressing Linux... done
> Loading file \efi\boot\gentoo.igz...done
> Linux version 3.3.8-gentoo (root@dolphin) (gcc version 4.5.3 (Gentoo 4.5.3-r2
> p1.6, pie-0.4.7) ) #1 SMP Wed Oct 3 04:40:00 UTC 2012
> EFI v1.10 by HP: SALsystab=0x3e528000 ACPI 2.0=0x3fe22000 SMBIOS=0x3e52a000
> HCDP=0x3fe20000
> booting generic kernel on platform hpzx1
> PCDP: v3 at 0x3fe20000
> Early serial console at MMIO 0x84053000 (options '9600n8')
> bootconsole [uart8250] enabled
> ACPI: RSDP 000000003fe22000 00028 (v02 HP)
> ACPI: XSDT 000000003fe2202c 00094 (v01 HP rx4640 00000000 HP 00000000)
> ACPI: FACP 000000003fe36cd8 000F4 (v03 HP rx4640 00000000 HP 00000000)
> ACPI Warning: 32/64X length mismatch in Gpe0Block: 32/16 (20120111/tbfadt-548)
> ACPI Warning: 32/64X length mismatch in Gpe1Block: 32/16 (20120111/tbfadt-548)
> ACPI: DSDT 000000003fe221c8 0D0F5 (v01 HP rx4640 00000007 INTL 20050309)
> ACPI: FACS 000000003fe36dd0 00040
> ACPI: SPCR 000000003fe36e10 00050 (v01 HP rx4640 00000000 HP 00000000)
> ACPI: DBGP 000000003fe36e60 00034 (v01 HP rx4640 00000000 HP 00000000)
> ACPI: APIC 000000003fe37080 000B0 (v01 HP rx4640 00000000 HP 00000000)
> ACPI: SPMI 000000003fe36e98 00050 (v04 HP rx4640 00000000 HP 00000000)
> ACPI: CPEP 000000003fe36f50 00034 (v01 HP rx4640 00000000 HP 00000000)
> ACPI: SSDT 000000003fe2f2c8 001A7 (v01 HP rx4640 00000006 INTL 20050309)
> ACPI: SSDT 000000003fe2f478 00F65 (v01 HP rx4640 00000006 INTL 20050309)
> ACPI: SSDT 000000003fe303e8 011CD (v01 HP rx4640 00000006 INTL 20050309)
> ACPI: SSDT 000000003fe315b8 021B5 (v01 HP rx4640 00000006 INTL 20050309)
> ACPI: SSDT 000000003fe33778 021B5 (v01 HP rx4640 00000006 INTL 20050309)
> ACPI: SSDT 000000003fe35938 011CD (v01 HP rx4640 00000006 INTL 20050309)
> ACPI: SSDT 000000003fe36b08 000DC (v01 HP rx4640 00000006 INTL 20050309)
> ACPI: SSDT 000000003fe36be8 000E0 (v01 HP rx4640 00000006 INTL 20050309)
> ACPI: Local APIC address c0000000fee00000
> 2 CPUs available, 2 CPUs total
> SMP: Allowing 2 CPUs, 0 hotplug CPUs
> Initial ramdisk at: 0xe0000040fe8c1000 (7111052 bytes)
> SAL 3.1: HP version 4.28
> SAL Platform features: None
> SAL: AP wakeup using external interrupt vector 0xff
> MCA related initialization done
> Virtual mem_map starts at 0xa0007fffc7200000
> Zone PFN ranges:
> DMA 0x00000400 -> 0x00040000
> Normal 0x00040000 -> 0x01040000
> Movable zone start PFN for each node
> Early memory PFN ranges
> 0: 0x00000400 -> 0x0000f7c9
> 0: 0x0000f88f -> 0x0000f94a
> 0: 0x0000ff00 -> 0x0000ff88
> 0: 0x01010000 -> 0x0103fbff
> 0: 0x0103fc00 -> 0x0103fef6
> 0: 0x0103ff1f -> 0x0103ff80
> 0: 0x0103ffa0 -> 0x0103fff8
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 201021
> Policy zone: Normal
> Kernel command line: BOOT_IMAGE=atapi0:/efi/boot/gentoo initrd=gentoo.igz
> root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs
> cdroot
> PID hash table entries: 4096 (order: 1, 32768 bytes)
> Memory: 4095648k/4119584k available (13370k code, 52480k reserved, 6165k
> data, 1152k init)
> Hierarchical RCU implementation.
> NR_IRQS:1024
> ACPI: Local APIC address c0000000fee00000
> GSI 20 (level, low) -> CPU 0 (0x0000) vector 49
> Console: colour VGA+ 80x25
> Calibrating delay loop... 2390.01 BogoMIPS (lpj=4780032)
> pid_max: default: 32768 minimum: 301
> Dentry cache hash table entries: 524288 (order: 8, 4194304 bytes)
> Inode-cache hash table entries: 262144 (order: 7, 2097152 bytes)
> Mount-cache hash table entries: 1024
> ACPI: Core revision 20120111
> Boot processor id 0x0/0x0
> Fixed BSP b0 value from CPU 1
> CPU 1: synchronized ITC with CPU 0 (last diff -32 cycles, maxerr 718 cycles)
> Brought up 2 CPUs
> Total of 2 processors activated (4780.03 BogoMIPS).
> DMI 2.3 present.
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> bio: create slab <bio-0> at 0
> ACPI: Added _OSI(Module Device)
> ACPI: Added _OSI(Processor Device)
> ACPI: Added _OSI(3.0 _SCP Extensions)
> ACPI: Added _OSI(Processor Aggregator Device)
> ACPI: Interpreter enabled
> ACPI: (supports S0 S5)
> ACPI: Using IOSAPIC for interrupt routing
> ACPI: No dock devices found.
> ACPI: PCI Root Bridge [L000] (domain 0000 [bus 00-1f])
> pci_root HWP0002:00: host bridge window [io 0x0000-0x1fff]
> pci_root HWP0002:00: host bridge window [mem 0x000a0000-0x000fffff]
> pci_root HWP0002:00: host bridge window [mem 0x80000000-0x8fffffff]
> pci_root HWP0002:00: host bridge window [mem 0x80004000000-0x80103fffffe]
> PCI host bridge to bus 0000:00
> pci_bus 0000:00: root bus resource [io 0x0000-0x1fff]
> pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff]
> pci_bus 0000:00: root bus resource [mem 0x80000000-0x8fffffff]
> pci_bus 0000:00: root bus resource [mem 0x80004000000-0x80103fffffe]
> pci0000:00: Unable to request _OSC control (_OSC support mask: 0x19)
> ACPI: PCI Root Bridge [L001] (domain 0000 [bus 20-3f])
> pci_root HWP0002:01: host bridge window [io 0x2000-0x3fff]
> pci_root HWP0002:01: host bridge window [mem 0x90000000-0x9fffffff]
> pci_root HWP0002:01: host bridge window [mem 0x90004000000-0x90103fffffe]
> PCI host bridge to bus 0000:20
> pci_bus 0000:20: root bus resource [io 0x2000-0x3fff]
> pci_bus 0000:20: root bus resource [mem 0x90000000-0x9fffffff]
> pci_bus 0000:20: root bus resource [mem 0x90004000000-0x90103fffffe]
> pci0000:20: Unable to request _OSC control (_OSC support mask: 0x19)
> ACPI: PCI Root Bridge [L002] (domain 0000 [bus 40-7f])
> pci_root HWP0002:02: host bridge window [io 0x4000-0x7fff]
> pci_root HWP0002:02: host bridge window [mem 0xa0000000-0xbfffffff]
> pci_root HWP0002:02: host bridge window [mem 0xa0004000000-0xa0103fffffe]
> PCI host bridge to bus 0000:40
> pci_bus 0000:40: root bus resource [io 0x4000-0x7fff]
> pci_bus 0000:40: root bus resource [mem 0xa0000000-0xbfffffff]
> pci_bus 0000:40: root bus resource [mem 0xa0004000000-0xa0103fffffe]
> pci0000:40: Unable to request _OSC control (_OSC support mask: 0x19)
> ACPI: PCI Root Bridge [L004] (domain 0000 [bus 80-9f])
> pci_root HWP0002:03: host bridge window [io 0x8000-0x9fff]
> pci_root HWP0002:03: host bridge window [mem 0xc0000000-0xcfffffff]
> pci_root HWP0002:03: host bridge window [mem 0xc0004000000-0xc0103fffffe]
> PCI host bridge to bus 0000:80
> pci_bus 0000:80: root bus resource [io 0x8000-0x9fff]
> pci_bus 0000:80: root bus resource [mem 0xc0000000-0xcfffffff]
> pci_bus 0000:80: root bus resource [mem 0xc0004000000-0xc0103fffffe]
> pci0000:80: Unable to request _OSC control (_OSC support mask: 0x19)
> ACPI: PCI Root Bridge [L005] (domain 0000 [bus a0-bf])
> pci_root HWP0002:04: host bridge window [io 0xa000-0xbfff]
> pci_root HWP0002:04: host bridge window [mem 0xd0000000-0xdfffffff]
> pci_root HWP0002:04: host bridge window [mem 0xd0004000000-0xd0103fffffe]
> PCI host bridge to bus 0000:a0
> pci_bus 0000:a0: root bus resource [io 0xa000-0xbfff]
> pci_bus 0000:a0: root bus resource [mem 0xd0000000-0xdfffffff]
> pci_bus 0000:a0: root bus resource [mem 0xd0004000000-0xd0103fffffe]
> pci0000:a0: Unable to request _OSC control (_OSC support mask: 0x19)
> ACPI: PCI Root Bridge [L006] (domain 0000 [bus c0-ff])
> pci_root HWP0002:05: host bridge window [io 0xc000-0xffff]
> pci_root HWP0002:05: host bridge window [mem 0xe0000000-0xfdffffff]
> pci_root HWP0002:05: host bridge window [mem 0xe0004000000-0xe0103fffffe]
> PCI host bridge to bus 0000:c0
> pci_bus 0000:c0: root bus resource [io 0xc000-0xffff]
> pci_bus 0000:c0: root bus resource [mem 0xe0000000-0xfdffffff]
> pci_bus 0000:c0: root bus resource [mem 0xe0004000000-0xe0103fffffe]
> pci0000:c0: Unable to request _OSC control (_OSC support mask: 0x19)
> vgaarb: device added: PCI:0000:00:04.0,decodes=io+mem,owns=io+mem,locks=none
> vgaarb: loaded
> vgaarb: bridge control possible 0000:00:04.0
> SCSI subsystem initialized
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> IOC: zx1 2.3 HPA 0xfed01000 IOVA space 1024Mb at 0x40000000
> Switching to clocksource itc
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp: PnP ACPI: found 8 devices
> ACPI: ACPI bus type pnp unregistered
> NET: Registered protocol family 2
> IP route cache hash table entries: 131072 (order: 6, 1048576 bytes)
> TCP established hash table entries: 524288 (order: 9, 8388608 bytes)
> TCP bind hash table entries: 65536 (order: 6, 1048576 bytes)
> TCP: Hash tables configured (established 524288 bind 65536)
> TCP reno registered
> UDP hash table entries: 2048 (order: 2, 65536 bytes)
> UDP-Lite hash table entries: 2048 (order: 2, 65536 bytes)
> NET: Registered protocol family 1
> GSI 17 (level, low) -> CPU 1 (0x0100) vector 50
> GSI 17 (level, low) -> CPU 1 (0x0100) vector 50 unregistered
> GSI 18 (level, low) -> CPU 0 (0x0000) vector 50
> GSI 18 (level, low) -> CPU 0 (0x0000) vector 50 unregistered
> GSI 23 (level, low) -> CPU 1 (0x0100) vector 50
> GSI 23 (level, low) -> CPU 1 (0x0100) vector 50 unregistered
> Trying to unpack rootfs image as initramfs...
> Freeing initrd memory: 6928kB freed
> perfmon: version 2.0 IRQ 238
> perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits)
> PAL Information Facility v0.5
> perfmon: added sampling format default_format
> perfmon_default_smpl: default_format v2.0 registered
> HugeTLB registered 256 MB page size, pre-allocated 0 pages
> VFS: Disk quotas dquot_6.5.2
> Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
> squashfs: version 4.0 (2009/01/31) Phillip Lougher
> SGI XFS with ACLs, security attributes, large block/inode numbers, no debug
> enabled
> SGI XFS Quota Management subsystem
> msgmni has been set to 8012
> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
> io scheduler noop registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> sn_pci_hotplug_init: PROM version does not support hotplug.
> acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> acpiphp: Slot [7] registered
> acpiphp: Slot [3] registered
> acpiphp: Slot [4] registered
> acpiphp: Slot [5] registered
> acpiphp: Slot [6] registered
> acpiphp: Slot [8] registered
> Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> GSI 16 (level, low) -> CPU 0 (0x0000) vector 50
> 0000:00:01.1: ttyS1 at MMIO 0x84053000 (irq = 53) is a 16550A
> console [ttyS1] enabled, bootconsole disabled
> console [ttyS1] enabled, bootconsole disabled
> 0000:00:01.1: ttyS2 at MMIO 0x84053010 (irq = 53) is a 16550A
> 0000:00:01.1: ttyS3 at MMIO 0x84053038 (irq = 53) is a 16550A
> EFI Time Services Driver v0.4
> input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> ACPI: Power Button [PWRF]
> input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
> ACPI: Sleep Button [SLPF]
> thermal LNXTHERM:00: registered as thermal_zone0
> ACPI: Thermal Zone [THM0] (27 C)
> brd: module loaded
> loop: module loaded
> rdac: device handler registered
> hp_sw: device handler registered
> emc: device handler registered
> alua: device handler registered
> Loading Adaptec I2O RAID: Version 2.4 Build 5go
> Detecting Adaptec I2O RAID controllers...
> GSI 71 (level, low) -> CPU 1 (0x0100) vector 51
> sym0: <1010-66> rev 0x1 at pci 0000:c0:01.0 irq 54
> sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
> sym0: open drain IRQ line driver, using on-chip SRAM
> sym0: using LOAD/STORE-based firmware.
> sym0: handling phase mismatch from SCRIPTS.
> sym0: SCSI BUS has been reset.
> scsi0 : sym-2.2.3
> scsi target0:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
> scsi 0:0:0:0: Direct-Access COMPAQ BF07285A36 HPB6 PQ: 0 ANSI: 3
> scsi target0:0:0: tagged command queuing enabled, command queue depth 16.
> scsi target0:0:0: Beginning Domain Validation
> scsi target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62)
> scsi target0:0:0: Ending Domain Validation
> scsi 0:0:1:0: Direct-Access COMPAQ BF072863BA HPB6 PQ: 0 ANSI: 3
> scsi target0:0:1: tagged command queuing enabled, command queue depth 16.
> scsi target0:0:1: Beginning Domain Validation
> scsi target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
> scsi target0:0:1: Ending Domain Validation
> scsi 0:0:2:0: Direct-Access COMPAQ BF072863BA HPB4 PQ: 0 ANSI: 3
> scsi target0:0:2: tagged command queuing enabled, command queue depth 16.
> scsi target0:0:2: Beginning Domain Validation
> scsi target0:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
> scsi target0:0:2: Ending Domain Validation
> scsi 0:0:3:0: Direct-Access COMPAQ BF072863BA HPB4 PQ: 0 ANSI: 3
> scsi target0:0:3: tagged command queuing enabled, command queue depth 16.
> scsi target0:0:3: Beginning Domain Validation
> scsi target0:0:3: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
> scsi target0:0:3: Ending Domain Validation
> scsi 0:0:15:0: Processor COMPAQ PROLIANT 7L7E*DB 2.30 PQ: 0 ANSI: 2
> scsi target0:0:15: Beginning Domain Validation
> scsi target0:0:15: Ending Domain Validation
> sd 0:0:1:0: [sdb] 142264000 512-byte logical blocks: (72.8 GB/67.8 GiB)
> sd 0:0:0:0: [sda] 142264000 512-byte logical blocks: (72.8 GB/67.8 GiB)
> sd 0:0:2:0: [sdc] 142264000 512-byte logical blocks: (72.8 GB/67.8 GiB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:1:0: [sdb] Write Protect is off
> sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO
> and FUA
> sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO
> and FUA
> sd 0:0:3:0: [sdd] 142264000 512-byte logical blocks: (72.8 GB/67.8 GiB)
> sd 0:0:2:0: [sdc] Write Protect is off
> sd 0:0:2:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO
> and FUA
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> sd 0:0:1:0: Attached scsi generic sg1 type 0
> sd 0:0:3:0: [sdd] Write Protect is off
> sda: unknown partition table
> sdb: unknown partition table
> sd 0:0:2:0: Attached scsi generic sg2 type 0
> sd 0:0:3:0: Attached scsi generic sg3 type 0
> scsi 0:0:15:0: Attached scsi generic sg4 type 3
> GSI 21 (level, low) -> CPU 0 (0x0000) vector 52
> pata_cmd64x 0000:00:03.0: Secondary port is disabled
> scsi1 : pata_cmd64x
> scsi2 : pata_cmd64x
> ata1: PATA max UDMA/100 cmd 0xe18 ctl 0xe24 bmdma 0xe00 irq 55
> ata2: DUMMY
> bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x
> 1.70.35-0 (2011/11/10)
> enic: Cisco VIC Ethernet NIC Driver, ver 2.1.1.31
> e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
> e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
> igb: Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k
> igb: Copyright (c) 2007-2012 Intel Corporation.
> ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.6.7-k
> ixgbe: Copyright (c) 1999-2012 Intel Corporation.
> Solarflare NET driver v3.1
> tehuti: Tehuti Networks(R) Network Driver, 7.29.3
> tehuti: Options: hw_csum
> Fusion MPT base driver 3.04.20
> Copyright (c) 1999-2008 LSI Corporation
> Fusion MPT SPI Host driver 3.04.20
> GSI 27 (level, low) -> CPU 1 (0x0100) vector 53
> mptbase: ioc0: Initiating bringup
> sd 0:0:3:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO
> and FUA
> sd 0:0:1:0: [sdb] Attached SCSI disk
> sd 0:0:0:0: [sda] Attached SCSI disk
> sdc: unknown partition table
> sd 0:0:2:0: [sdc] Attached SCSI disk
> sdd: unknown partition table
> sd 0:0:3:0: [sdd] Attached SCSI disk
> ata1.00: ATAPI: HL-DT-ST DVD+RW GCA-4040N, 1.20, max MWDMA2
> ata1.00: configured for MWDMA2
> scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+RW GCA-4040N 1.20 PQ: 0 ANSI: 5
> sr0: scsi3-mmc drive: 40x/24x writer cd/rw xa/form2 cdda tray
> cdrom: Uniform CD-ROM driver Revision: 3.20
> sr 1:0:0:0: Attached scsi generic sg5 type 5
> ioc0: LSI53C1030 C0: Capabilities={Initiator,Target}
> scsi3 : ioc0: LSI53C1030 C0, FwRev=01032341h, Ports=1, MaxQ=255, IRQ=56
> scsi 3:0:1:0: Direct-Access HP 73.4G MAS3735NC HPC4 PQ: 0 ANSI: 3
> scsi target3:0:1: Beginning Domain Validation
> scsi target3:0:1: Ending Domain Validation
> scsi target3:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI PCOMP (6.25 ns,
> offset 127)
> sd 3:0:1:0: Attached scsi generic sg6 type 0
> sd 3:0:1:0: [sde] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
> sd 3:0:1:0: [sde] Write Protect is off
> sd 3:0:1:0: [sde] Write cache: disabled, read cache: enabled, supports DPO
> and FUA
> GSI 28 (level, low) -> CPU 0 (0x0000) vector 54
> mptbase: ioc1: Initiating bringup
> ioc1: LSI53C1030 C0: Capabilities={Initiator,Target}
> scsi4 : ioc1: LSI53C1030 C0, FwRev=01032341h, Ports=1, MaxQ=255, IRQ=57
> scsi 4:0:0:0: Direct-Access HP 73.4G MAS3735NC HPC4 PQ: 0 ANSI: 3
> scsi target4:0:0: Beginning Domain Validation
> sde: sde1 sde2 sde3 sde4 sde5
> scsi target4:0:0: Ending Domain Validation
> scsi target4:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI PCOMP (6.25 ns,
> offset 127)
> sd 4:0:0:0: Attached scsi generic sg7 type 0
> sd 4:0:0:0: [sdf] 143374738 512-byte logical blocks: (73.4 GB/68.3 GiB)
> sd 3:0:1:0: [sde] Attached SCSI disk
> sd 4:0:0:0: [sdf] Write Protect is off
> sd 4:0:0:0: [sdf] Write cache: disabled, read cache: enabled, supports DPO
> and FUA
> Fusion MPT FC Host driver 3.04.20
> Fusion MPT SAS Host driver 3.04.20
> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> GSI 23 (level, low) -> CPU 1 (0x0100) vector 55
> ehci_hcd 0000:00:02.2: EHCI Host Controller
> ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
> sdf: sdf1 sdf2 sdf3 sdf4
> ehci_hcd 0000:00:02.2: irq 52, io mem 0x84050000
> sd 4:0:0:0: [sdf] Attached SCSI disk
> ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 0.95
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 5 ports detected
> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> GSI 17 (level, low) -> CPU 0 (0x0000) vector 56
> ohci_hcd 0000:00:02.0: OHCI Host Controller
> ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
> ohci_hcd 0000:00:02.0: irq 50, io mem 0x84052000
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 3 ports detected
> GSI 18 (level, low) -> CPU 1 (0x0100) vector 57
> ohci_hcd 0000:00:02.1: OHCI Host Controller
> ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
> ohci_hcd 0000:00:02.1: irq 51, io mem 0x84051000
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> uhci_hcd: USB Universal Host Controller Interface driver
> mousedev: PS/2 mouse device common for all mice
> device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised:
> [email protected]
> EFI Variables Facility v0.08 2004-May-17
> usbcore: registered new interface driver usbhid
> usbhid: USB HID core driver
> TCP cubic registered
> Initializing XFRM netlink socket
> NET: Registered protocol family 17
> Freeing unused kernel memory: 1152kB freed
>>> Loading modules
> :: Scanning for cciss...cciss loaded.
> :: Scanning for qla2xxx...qla2xxx loaded.
> :: Scanning for lpfc...lpfc loaded.
> :: Scanning for usb-storage...usb-storage loaded.
> :: Scanning for scsi_wait_scan...scsi_wait_scan loaded.
> :: Scanning for dm-mirror...dm-log, dm-region-hash, dm-mirror loaded.
> :: Scanning for dm-snapshot...dm-snapshot loaded.
> :: Scanning for raid0...raid0 loaded.
> :: Scanning for raid1...raid1 loaded.
> :: Scanning for raid456...async_tx, xor, async_xor, raid6_pq, async_pq,
> async_memcpy, async_raid6_recov, raid456 loaded.
> :: Scanning for raid10...raid10 loaded.
> :: Scanning for nfs...sunrpc, lockd, nfs loaded.
> :: Scanning for fuse...fuse loaded.
> :: Scanning for e1000...e1000 loaded.
> :: Scanning for tg3...libphy, tg3 loaded.
>>> Activating mdev
>>> Loading keymaps
> Please select a keymap from the following list by typing in the appropriate
> name or number. Hit Enter for the default "us/41" US English keymap.
>
> 1 azerty 7 cf 13 es 19 il 25 mk 31 ru 37 trf
> 2 be 8 croat 14 et 20 is 26 nl 32 se 38 trq
> 3 bg 9 cz 15 fi 21 it 27 no 33 sg 39 ua
> 4 br-a 10 de 16 fr 22 jp 28 pl 34 sk-y 40 uk
> 5 br-l 11 dk 17 gr 23 la 29 pt 35 sk-z 41 us
> 6 by 12 dvorak 18 hu 24 lt 30 ro 36 slovene 42 wangbe
>
> << Load keymap (Enter for default):
>>> Keeping default keymap
>>> Making tmpfs for /newroot
>>> Looking for the cdrom
>>> Attempting to mount media:- /dev/sr0
>>> Media found on /dev/sr0
>>> Determining root device...
>>> Determining looptype ...
>>> Mounting squashfs filesystem
>>> Copying read-write image contents to tmpfs
>>> No cdupdate.sh script found, skipping...
>>> Booting (initramfs)..
> INIT: version 2.88 booting
>
> OpenRC 0.9.8.4 is starting up Gentoo Linux (ia64)
>
> * /proc is already mounted, skipping
> * WARNING: rc_sys not defined in rc.conf. Falling back to automatic detection
> * Caching service dependencies ...
> Service `unmute' needs non existent service `alsasound'
> [ ok ]
> * Mounting debug filesystem ...
> [ ok ]
> * /dev is already mounted
> * Starting udev ...
> [ ok ]
> * Populating /dev with existing devices through uevents ...
> [ ok ]
> * Waiting for uevents to be processed ...
> [ ok ]
> * Mounting /dev/shm ...
> [ ok ]
> * Setting system clock using the hardware clock [UTC] ...
> [ ok ]
> * Autoloaded 0 module(s)
> * Starting up RAID devices ...
> mdadm: No arrays found in config file or automatically
> [ !! ]
> [ ok ]
> * Checking local filesystems ...
> [ ok ]
> * Updating /etc/mtab ...
> [ ok ]
> * Mounting local filesystems ...
> [ ok ]
> * Configuring kernel parameters ...
> [ ok ]
> mkdir: cannot create directory '/var/run': File exists
> * failed to create needed directory /var/run
> [ !! ]
> * ERROR: bootmisc failed to start
> * Setting hostname to livecd ...
> [ ok ]
> * Setting terminal encoding [UTF-8] ...
> [ ok ]
> * Setting keyboard mode [UTF-8] ...
> [ ok ]
> * Loading key mappings [us] ...
> [ ok ]
> * Bringing up interface lo
> * Caching network module dependencies
> * 127.0.0.1/8 ...
> [ ok ]
> * Adding routes
> * 127.0.0.0/8 via 127.0.0.1 ...
> [ ok ]
> * Mounting USB device filesystem [usbfs] ...
> [ ok ]
> * Mounting misc binary format filesystem ...
> [ ok ]
> * Loading custom binary format handlers ...
> [ ok ]
> * Activating swap devices ...
> [ ok ]
> INIT: Entering runlevel: 3
> * Checking for firmware to unpack ...
> * Unpacking firmware ...
> [ ok ]
> [ ok ]
> * Starting hwsetup ...
> [ ok ]
> mkdir: cannot create directory '/var/run': File exists
> * failed to create needed directory /var/run
> [ !! ]
> * ERROR: bootmisc failed to start
> * Starting syslog-ng ...
> Error creating persistent state file;
> filename='/var/lib/misc/syslog-ng.persist-', error='No such file or directory
> (2)'
> * start-stop-daemon: failed to start `/usr/sbin/syslog-ng'
> * Failed to start syslog-ng
> [ !! ]
> * ERROR: syslog-ng failed to start
> * Starting acpid ...
> acpid: can't open socket /var/run/acpid.socket: No such file or directory
> * Failed to start acpid
> [ !! ]
> * ERROR: acpid failed to start
> * ERROR: unmute needs service(s) alsasound
> * Mouse is Device 05f3:0203 at /dev/input/mice ...
> * Caching service dependencies ...
> Service `unmute' needs non existent service `alsasound'
> [ ok ]
> * Starting gpm ...
> [ ok ]
> * Starting rpcbind ...
> [ !! ]
> * ERROR: rpcbind failed to start
> * ERROR: cannot start rpc.statd as rpcbind would not start
> * ERROR: cannot start nfsmount as rpcbind would not start
> * Auto-scrambling root password for security ...
> [ ok ]
> * ERROR: cannot start autoconfig as acpid would not start
> * Adjusting inittab ...
> [ ok ]
> * Mounting network filesystems ...
> [ ok ]
> * Doing udev cleanups
> * Starting local
> [ ok ]
>
> Questo messaggio e i suoi allegati sono indirizzati esclusivamente alle
> persone indicate. La diffusione, copia o qualsiasi altra azione derivante
> dalla conoscenza di queste informazioni sono rigorosamente vietate. Qualora
> abbiate ricevuto questo documento per errore siete cortesemente pregati di
> darne immediata comunicazione al mittente e di provvedere alla sua
> distruzione, Grazie.
>
> This e-mail and any attachments is confidential and may contain privileged
> information intended for the addressee(s) only. Dissemination, copying,
> printing or use by anybody else is unauthorised. If you are not the intended
> recipient, please delete this message and any attachments and advise the
> sender by return e-mail, Thanks.
>
>
> --
> To UNSUBSCRIBE, email to [email protected]
> with a subject of "unsubscribe". Trouble? Contact [email protected]
> Archive:
> http://lists.debian.org/5DA6D16A39710843ACA344B75F2C76891AAF0D1818@GRFMBX702RM001.griffon.local
>
--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
Archive:
http://lists.debian.org/CAA9xbM7sZB+FnDEJts9z866TCJhmwJexq0-WB55N4B5iEA=_...@mail.gmail.com
