I remember having occasional problems with D6 (restart/rebuild almost
always fixed it) - but they were fairly infrequent. D7 seemed to be
better - and I haven't been using BDS2006 for long enough to comment
(apart from the red-squiggly-lines indicating compiler errors where none
exist).
I do remember having problems with access violations occurring in a
large application - spending ages hunting them down, only to rebuild and
it work again (you would think I would have learned the first time).
Alister Christie
Computers for People
Ph: 04 471 1849 Fax: 04 471 1266
http://www.salespartner.co.nz
PO Box 13085
Johnsonville
Wellington
Stacey Verner wrote:
We are using Delphi 6 and have a few large projects that we constantly
get linker errors on.
Sometimes things will work fine, even for days at a time, but often
the linking stage will either:
* fail with "Out of memory while expanding stream"
* fail with rlink32 error XXXX.
* fail with an access violation in rlink32.
* freeze and us 100% cpu.
Sometimes a rebuild will work correctly, and sometimes we have to go
through all sorts of rituals like restarting Delphi or the computer,
building another more simple project etc etc.
I have seen a few posts with this same problem but no resolutions.
Any ideas on what we could do about it?
Stacey
Stacey Verner Ph: +64-9-4154790
Software Developer Fax: +64-9-4154791
DDI: +64-9-4154797
Email: [EMAIL PROTECTED]
<blocked::mailto:[EMAIL PROTECTED]>
CJN Technologies Ltd.
PO Box 302-278, North Harbour, Auckland 1330, New Zealand
12 Piermark Drive, North Harbour, Auckland, New Zealand
Visit our website at http://www.cjntech.co.nz/
<blocked::http://www.cjntech.co.nz/>
------------------------------------------------------------------------
_______________________________________________
Delphi mailing list
[email protected]
http://ns3.123.co.nz/mailman/listinfo/delphi
_______________________________________________
Delphi mailing list
[email protected]
http://ns3.123.co.nz/mailman/listinfo/delphi
