L.S.,
Thanks for pointing that out! It's good to know that the CXF community can facilitate those quick fix releases if necessary. By all means, if you or any of the other guys has some bandwidth to do the extra release, that would obviously be great. I guess the 'quick fix' that Freeman mentioned became the real solution then... I just gave things a quick try here and just upgrading to CXF 2.4.4-SNAPSHOT does seem to work out fine for the most part. There are some test failures in some of the itests, but those may well be something I missed in my attempt to quickly test this. Other than that, the resulting kit does seem to work fine - it does have multiple versions of the CXF features descriptor installed because the Camel descriptor still points at the old version (cfr. one of the issues that came up in the 'Features' thread earlier on). As far as I am concerned, this is just a minor inconvenience compared to the possible benefit of being able to upgrade to more recent fix versions of almost anything else, so if the offer to provide a CXF 2.4.4 fix release still stands, we'd highly appreciate that. (my apologies for the annoyance - it was in no way intentional, in ServiceMix-land we always have to wait for the entire universe to align to do a release - fancy a Belgian beer or some chocolates some day to make up for it ? ;)). Regards, Gert Vanthienen ------------------------ FuseSource Web: http://fusesource.com Blog: http://gertvanthienen.blogspot.com/ On Mon, Oct 24, 2011 at 9:11 PM, Daniel Kulp <[email protected]> wrote: > > I just want to point out that I find it slightly "annoying" that, > throughout > this discussion, not one person has even asked on the CXF lists what it > would > take to get a 2.4.4 release out that fixes the issue. CXF is likely the > community that would be MOST willing to get releases out to fix issues, > it's > just a matter of asking. It's been done for Geronimo. It's been done for > JBoss. etc.... > > I'm planning on doing the CXF 2.5.0 builds later this week or early next > week > (as discussed on dev@cxf earlier this month). Doing the 2.4.4 release at > the > same time is not a big deal. We could have done one sooner if someone > would > have asked. For that matter, Freeman, Guillaume, Willem, etc.. could > have > easily started a CXF release. Unlike smx releases, CXF releases are fairly > quick and easy. Mostly painless. :-) And documented: > > http://cxf.apache.org/release-management.html > > > Dan > > > On Monday, October 24, 2011 11:54:23 AM Gert Vanthienen wrote: > > Hey Freeman, > > > > > > I missed the remark that we're stuck on the backlevel versions - I'll > make > > the necessary corrections to get things on these versions again. > > > > FWIW, I do think we have to figure out a way to improve features > descriptors > > to avoid being stuck on entire set of backlevel artifacts just because of > > one issue in one of the dependencies. There should be no technical > reason > > why we can't upgrade to Spring 3.0.6.RELEASE because of an issue in CXF > > 2.4.2 in my mind - shouldn't OSGi version ranges allow us to just do > these > > little upgrades without breaking everything else? > > > > > > Regards, > > > > Gert Vanthienen > > ------------------------ > > FuseSource > > Web: http://fusesource.com > > Blog: http://gertvanthienen.blogspot.com/ > > > > On Mon, Oct 17, 2011 at 11:43 AM, Freeman Fang > <[email protected]>wrote: > > > Hi JB, > > > > > > CXF 2.4.3 has a problem that the http-osgi transport can't work with > > > felix, also the cxf 2.4.3 use spring 3.0.6 which can't work with karaf > > > 2.2.2, also camel 2.8.1 use cxf 2.4.2, for the reason above all, we > > > should use CXF 2.4.2/Camel 2.8.1/Karaf 2.2.2 for SMX 4.4. > > > > > > Btw, I just revert for components trunk so that we still use cxf 2.4.2. > > > > > > Regards > > > Freeman > > > > > > On 2011-10-17, at 下午5:24, Jean-Baptiste Onofré wrote: > > > Hi all, > > > > > >> All required dependencies are now available to ServiceMix 4.4: > > >> - CXF 2.4.3 has been released and available on Maven central repo > > >> - Camel 2.8.1 has been released and available on Maven central repo > > >> - ActiveMQ 5.5.0 is available > > >> - Karaf 2.2.2 is available > > >> > > >> I think that we are ready for the ServiceMix 4.4 release. > > >> > > >> As discussed before, the releases will be performed in a row, it > > >> means: > > >> - ServiceMix Utils 1.5.0 > > >> - ServiceMix Components 2011.02 > > >> - ServiceMix NMR 1.5.0 > > >> - ServiceMix (Features) 4.4.0 > > >> > > >> and in a second row: > > >> - ServiceMix 3.4 > > >> > > >> I guess that the following Jiras should be fixed before release: > > >> - SMX4-939 > > >> - SMX4-916 > > >> - SMX4-885 > > >> - SMX4-884 > > >> - SMX4NMR-269 > > >> > > >> I will pick up some. It could be great if we can cut off the releases > > >> at > > >> the end of this week. > > >> > > >> WDYT ? > > >> > > >> Regards > > >> JB > > >> -- > > >> Jean-Baptiste Onofré > > >> [email protected] > > >> http://blog.nanthrax.net > > >> Talend - http://www.talend.com > > > > > > ------------------------------**--------------- > > > Freeman Fang > > > > > > FuseSource > > > Email:[email protected] > > > Web: fusesource.com > > > Twitter: freemanfang > > > Blog: http://freemanfang.blogspot.**com > > > <http://freemanfang.blogspot.com> > -- > Daniel Kulp > [email protected] > http://dankulp.com/blog > Talend - http://www.talend.com >
