Hi all, sorry for the delay, I was distracted by other tasks. So, I had a chance to run a multi-hop test on a secured mesh. I used up to 4 nodes for the hop test. Again I'm not using any HT mode. I ran Jperf from PCs connected to the nodes via ethernet (nodes are setup in bridge mode, i.e. mesh and ethernet interface are bridged together). I ran the TCP tests with a 16KB buffer size on channel 149.
Node 1 -> Node2 (1 hop): ~17Mbps Node 1 -> Node 2 -> Node 3 (2 hops): ~8.5 Mbps Node 1 -> Node 2 -> Node 3 -> Node 4 (3 hops): ~4Mbps The results were similar on both directions. Note : I forced the path using iw mesh0 set mpath ... next_hop ... (I noticed that forcing mesh_max_peer_links to 1 does not work) Hope this helps... --Fabrice _______________________________________________ Devel mailing list [email protected] http://open80211s.com/mailman/listinfo/devel
