Hi, Fabrice
> Node 1 -> Node2 (1 hop): ~17Mbps > Node 1 -> Node 2 -> Node 3 (2 hops): ~8.5 Mbps > Node 1 -> Node 2 -> Node 3 -> Node 4 (3 hops): ~4Mbps > Your results look promising. Is this based on open80211s-0.5 release after applying the ath9k patch that I posed? Did you ever try out HT20 or HT40 for multi-hop scenario after applying the patch I posed? You have mentioned before "I changed to minstrel and the problem went away". Can you elaborate this. My throughput is only 3Mbps for Node 1 > Node 2 > Node 3 secured HT20 mesh setup. Beside, I observe that there is contention problem (out of memory in my mesh node) if Node 1 and Node 2 simultaneously having heavy traffic to Node 3 (either Node 1 or Node 2 will crash due to out of memory issues). Hi, Javier Can you advice the proper way to setup the multi-hop scenario if three of the nodes are near to each others. I am using the "iw mesh0 mpath set xx next_hop" for this. Is this enough? Please advice. Thanks Regards, Chun-Yeow
_______________________________________________ Devel mailing list [email protected] http://open80211s.com/mailman/listinfo/devel
