Göktuğ Yıldırım a écrit : > Patcher2k viafb is said to be better than via opensource fb driver and that > is what I am using. The advice below is related to patcher2k or via open > source fb driver?
patcher2k. But it also applies to viaarena: the parameters are just named differently... > If I should use patcher2k as a module how can I know the modprobe > parameters? [EMAIL PROTECTED]:~# modinfo viafb filename: /lib/modules/2.6.11/kernel/drivers/video/cle266/viafb.ko parmtype: mode:charp parmtype: bpp:int parmtype: refresh:int parmtype: noaccel:int parmtype: TVon:int parmtype: TVtype:int parmtype: TVoverscan:int parmtype: memsize:long author: Andre Kriehn description: UNICHROME FB-Driver license: GPL vermagic: 2.6.11 preempt VIAC3-2 gcc-3.3 depends: cfbimgblt alias: pci:v00001106d00003122sv*sd*bc*sc*i* alias: pci:v00001106d00007205sv*sd*bc*sc*i* > If one must use patcher2k patch as a module than how to enable bootsplash? Once you get everything working, you can compile-in the driver, and eventually get bottspash to work... I didn't try that, though. > Thanks, > > Goktug > > PS: Is there any uptodate patches against patcher2k kernel patch? As far s I > know Mark Adams patch and irq reenabler patch of Stefan Lucke are those. If you don't use TV-out, that's all, I think. There is still no central repository, but it would be very helpful. > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Nicolas Huillard > Sent: 11 Ekim 2005 Salı 11:57 > To: [email protected] > Subject: Re: [directfb-users] TV Out > > Bu Bacoo a écrit : > >>Hello >> >>Is it somehow possible to get DirectFB working outside my TV out? Using > > VIA > >>UniChrome integrated graphics and I do like to do with DFB something like >> >>Option "ActiveDevice" "CRT,TV" >>Option "TVType" "NTSC" >>Option "TVOutput" "S-Video" >> >>in xorg's conf. >> >>Is there some way? > > > You lmust turn on/off TV-out when loading the kernel frame-buffer > driver. Depending on the driver version, it may be : > > modprobe viafb mode=720x576 bpp=32 refresh=50 TVon=1 TVoverscan=1 > > or "TV_ON=1" (resp. "=0") > > You may have the following in /etc/modules : > > viafb mode=720x576 bpp=32 refresh=50 TVon=1 TVoverscan=1 > > ...or your kernel frame-buffer driver is compiled-in and you're stuck... > (recompile the kernel and make the driver a loadable module). -- NH _______________________________________________ directfb-users mailing list [email protected] http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
