Göktuğ Yıldırım a écrit : > Is there any way to change parameters for built-in driver? (like > vesa=viafb,TVON=1,... in LILO) > * Is it possible to use both vesa and viafb compiled-in?
Maybe... They will both use the same hardware, so if you are sure not to use them at the same time, it could work. When I was doing that, I didn't really understand how it worked, and stopped compiling both, just to be sure. > I currently do not use TVOut. But will be using very soon. Where can I get > patches for TVOut if exits? On the same mailing-list. I'll update my patch (TV-out for VT1622, present on M10k mobo), one day... and send it to the list. > Thanks in advance, > > Goktug > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Nicolas Huillard > Sent: 11 Ekim 2005 Salı 12:41 > To: [email protected] > Subject: Re: [directfb-users] TV Out > > Göktuğ Yıldırım a écrit : > >>Patcher2k viafb is said to be better than via opensource fb driver and > > that > >>is what I am using. The advice below is related to patcher2k or via open >>source fb driver? > > > patcher2k. > But it also applies to viaarena: the parameters are just named > differently... > > >>If I should use patcher2k as a module how can I know the modprobe >>parameters? > > > [EMAIL PROTECTED]:~# modinfo viafb > filename: /lib/modules/2.6.11/kernel/drivers/video/cle266/viafb.ko > parmtype: mode:charp parmtype: bpp:int > parmtype: refresh:int > parmtype: noaccel:int > parmtype: TVon:int > parmtype: TVtype:int > parmtype: TVoverscan:int > parmtype: memsize:long > author: Andre Kriehn > description: UNICHROME FB-Driver > license: GPL > vermagic: 2.6.11 preempt VIAC3-2 gcc-3.3 > depends: cfbimgblt > alias: pci:v00001106d00003122sv*sd*bc*sc*i* > alias: pci:v00001106d00007205sv*sd*bc*sc*i* > > >>If one must use patcher2k patch as a module than how to enable bootsplash? > > > Once you get everything working, you can compile-in the driver, and > eventually get bottspash to work... > I didn't try that, though. > > >>Thanks, >> >>Goktug >> >>PS: Is there any uptodate patches against patcher2k kernel patch? As far s > > I > >>know Mark Adams patch and irq reenabler patch of Stefan Lucke are those. > > > If you don't use TV-out, that's all, I think. There is still no central > repository, but it would be very helpful. > > >>-----Original Message----- >>From: [EMAIL PROTECTED] >>[mailto:[EMAIL PROTECTED] On Behalf Of Nicolas Huillard >>Sent: 11 Ekim 2005 Salı 11:57 >>To: [email protected] >>Subject: Re: [directfb-users] TV Out >> >>Bu Bacoo a écrit : >> >> >>>Hello >>> >>>Is it somehow possible to get DirectFB working outside my TV out? Using >> >>VIA >> >> >>>UniChrome integrated graphics and I do like to do with DFB something like >>> >>>Option "ActiveDevice" "CRT,TV" >>>Option "TVType" "NTSC" >>>Option "TVOutput" "S-Video" >>> >>>in xorg's conf. >>> >>>Is there some way? >> >> >>You lmust turn on/off TV-out when loading the kernel frame-buffer >>driver. Depending on the driver version, it may be : >> >>modprobe viafb mode=720x576 bpp=32 refresh=50 TVon=1 TVoverscan=1 >> >>or "TV_ON=1" (resp. "=0") >> >>You may have the following in /etc/modules : >> >>viafb mode=720x576 bpp=32 refresh=50 TVon=1 TVoverscan=1 >> >>...or your kernel frame-buffer driver is compiled-in and you're stuck... >>(recompile the kernel and make the driver a loadable module). > > -- NH _______________________________________________ directfb-users mailing list [email protected] http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
