Is there any way to change parameters for built-in driver? (like
vesa=viafb,TVON=1,... in LILO)
* Is it possible to use both vesa and viafb compiled-in?
I currently do not use TVOut. But will be using very soon. Where can I get
patches for TVOut if exits?
Thanks in advance,
Goktug
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Nicolas Huillard
Sent: 11 Ekim 2005 Salı 12:41
To: [email protected]
Subject: Re: [directfb-users] TV Out
Göktuğ Yıldırım a écrit :
> Patcher2k viafb is said to be better than via opensource fb driver and
that
> is what I am using. The advice below is related to patcher2k or via open
> source fb driver?
patcher2k.
But it also applies to viaarena: the parameters are just named
differently...
> If I should use patcher2k as a module how can I know the modprobe
> parameters?
[EMAIL PROTECTED]:~# modinfo viafb
filename: /lib/modules/2.6.11/kernel/drivers/video/cle266/viafb.ko
parmtype: mode:charp parmtype: bpp:int
parmtype: refresh:int
parmtype: noaccel:int
parmtype: TVon:int
parmtype: TVtype:int
parmtype: TVoverscan:int
parmtype: memsize:long
author: Andre Kriehn
description: UNICHROME FB-Driver
license: GPL
vermagic: 2.6.11 preempt VIAC3-2 gcc-3.3
depends: cfbimgblt
alias: pci:v00001106d00003122sv*sd*bc*sc*i*
alias: pci:v00001106d00007205sv*sd*bc*sc*i*
> If one must use patcher2k patch as a module than how to enable bootsplash?
Once you get everything working, you can compile-in the driver, and
eventually get bottspash to work...
I didn't try that, though.
> Thanks,
>
> Goktug
>
> PS: Is there any uptodate patches against patcher2k kernel patch? As far s
I
> know Mark Adams patch and irq reenabler patch of Stefan Lucke are those.
If you don't use TV-out, that's all, I think. There is still no central
repository, but it would be very helpful.
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Nicolas Huillard
> Sent: 11 Ekim 2005 Salı 11:57
> To: [email protected]
> Subject: Re: [directfb-users] TV Out
>
> Bu Bacoo a écrit :
>
>>Hello
>>
>>Is it somehow possible to get DirectFB working outside my TV out? Using
>
> VIA
>
>>UniChrome integrated graphics and I do like to do with DFB something like
>>
>>Option "ActiveDevice" "CRT,TV"
>>Option "TVType" "NTSC"
>>Option "TVOutput" "S-Video"
>>
>>in xorg's conf.
>>
>>Is there some way?
>
>
> You lmust turn on/off TV-out when loading the kernel frame-buffer
> driver. Depending on the driver version, it may be :
>
> modprobe viafb mode=720x576 bpp=32 refresh=50 TVon=1 TVoverscan=1
>
> or "TV_ON=1" (resp. "=0")
>
> You may have the following in /etc/modules :
>
> viafb mode=720x576 bpp=32 refresh=50 TVon=1 TVoverscan=1
>
> ...or your kernel frame-buffer driver is compiled-in and you're stuck...
> (recompile the kernel and make the driver a loadable module).
--
NH
_______________________________________________
directfb-users mailing list
[email protected]
http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
_______________________________________________
directfb-users mailing list
[email protected]
http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
