Thanks a lot, guys! Just curious, is the switch still mounted at the top, or did you try mounting the new switch at the bottom?
On Tue, Oct 1, 2013 at 11:18 PM, Brian Kulyk <br...@kulyk.ca> wrote: > Thanks to the amazing help from Stephan, Dr. West, Aemilianus and Thor we > managed to get the new mechanical switch in place and homing properly. It > looks to be working great and people should be able to use the printer > again, but it looks like the print bed will require some additional > leveling. Small parts in the center of the bed should be fine, but you may > experience warping in larger parts. > > Thanks again to everyone who has helped get the printer running again! > Amazing team work. > > > Brian Kulyk > 204.887.6988 > > > On Tue, Oct 1, 2013 at 3:47 PM, Brian Kulyk <br...@kulyk.ca> wrote: >> >> I bought one this afternoon, I will bring it to the meeting today. >> >> >> Brian Kulyk >> 204.887.6988 >> >> >> On Tue, Oct 1, 2013 at 2:45 PM, Stefan H.A <stefan...@gmail.com> wrote: >>> >>> I believe there are some at the space(can anyone confirm). If not I have >>> some at home. I can stop there and grab a couple on my way to the meeting. >>> >>> On 2013-10-01 2:33 PM, "Benjamin Bergman" <b...@benbergman.ca> wrote: >>>> >>>> Ya, I think my vote is for the microswitch as well, but I'll toss a >>>> couple hall effect sensors in with my order so we can fix up the other >>>> board in case we want to use it again. Do we have extra microswitches, >>>> or should I grab a few of those too? >>>> >>>> On Tue, Oct 1, 2013 at 2:06 PM, Stefan H.A <stefan...@gmail.com> wrote: >>>> > Yeah, I think a micro switch (as picture in the link in the IRC >>>> > conversation) will work fine. We could use an opto-interupter ( >>>> > >>>> > http://www.jameco.com/1/1/25649-h21a1-opto-electronic-interrupter-switch-transistor-sensors.html >>>> > ) if we want to get fancy but I think a microswitch will work just as >>>> > well. >>>> > >>>> > On 2013-10-01 1:48 PM, "Brian Kulyk" <br...@kulyk.ca> wrote: >>>> >> >>>> >> I was looking on Digikey for the sensor we need and noticed many >>>> >> different >>>> >> versions so I decided to contact Maker's Tool Works to find out the >>>> >> specifics of the sensor they used. They (as well as the folks on >>>> >> IRC) >>>> >> suggest using a mechanical switch. Eventually I found that this is >>>> >> the >>>> >> part we need if we want to continue using the hall effect sensor. >>>> >> >>>> >> http://www.digikey.ca/product-detail/en/TLE4905L%20E6433/TLE4905LE6433INCT-ND/1650234 >>>> >> >>>> >> If we decide to order these we should get a few backups. Ben, it's >>>> >> not >>>> >> too late to combine with your order that would be great. I can give >>>> >> you >>>> >> some cash for the order tonight at the meeting. >>>> >> >>>> >> ME: >>>> >> >>>> >>> >>>> >>> I have broken the sensor off of the "Cheep O" board. I would order >>>> >>> another one from you, but the store appears to be about can I please >>>> >>> get >>>> >>> some additional information about the sensor so I can order a >>>> >>> replacement >>>> >>> elsewhere. >>>> >> >>>> >> >>>> >> Maker's Tool Works >>>> >> >>>> >>> Unfortunately we are not expecting to have them back in stock for >>>> >>> quiet a >>>> >>> while. You're kit should have another mechanical endstop. All >>>> >>> current kits >>>> >>> do not have a cheap-o and we are finding the mechanical just as >>>> >>> effective. >>>> >>> The Cheap-o hall endsop is designed by BLDDK, I have seen one clone >>>> >>> online >>>> >>> and some diy versions on thingiverse. >>>> >> >>>> >> >>>> >> I found that I can order a replacement board from here: >>>> >> http://www.elecfreaks.com/store/hall-endstop-p-654.html Though it >>>> >> does look >>>> >> a little different they are both based off the BLDDK's design. >>>> >> >>>> >> Chat log from IRC: >>>> >> >>>> >>>> [11:48] <grumpy> I broke the sensor off of my cheap-o hall z >>>> >>>> endstop. >>>> >>>> Can anybody tell me where I can order a replacement (the official >>>> >>>> store is >>>> >>>> sold out). >>>> >>>> >>>> >>>> [11:48] <skywurz> grumpy i too did that >>>> >>>> >>>> >>>> [11:48] <skywurz> grumpy i dont like that sensor >>>> >>>> >>>> >>>> [11:49] <grumpy> skywurz what are you using now? >>>> >>>> >>>> >>>> [11:49] <skywurz> grumpy may i recommend >>>> >>>> http://www.wuala.com/skywurz/Public/IMG_20130519_122911.jpg/ >>>> >>>> >>>> >>>> [11:51] <grumpy> skywurz I was thinking of going with something >>>> >>>> like >>>> >>>> that, but others were worried that it might not be as accurate as >>>> >>>> the >>>> >>>> hall-effect thing, I take you are not having any troubles with your >>>> >>>> replacement? >>>> >>>> >>>> >>>> [11:51] <skywurz> grumpy it really does not make that much of a >>>> >>>> difference >>>> >>>> >>>> >>>> [11:52] <skywurz> think about how far off you could have thrown >>>> >>>> that >>>> >>>> cheap-o off by bumping the sensor >>>> >>>> >>>> >>>> [11:54] <grumpy> skywurz Sounds good I will give it shot. I >>>> >>>> already >>>> >>>> printed off a bracket to use a switch like that anyway. >>>> >>>> >>>> >>>> [11:54] <skywurz> never answered my imagineer question >>>> >>>> >>>> >>>> [11:54] <skywurz> grumpy sweet >>>> >>>> >>>> >>>> [11:54] <skywurz> grumpy if you have no interest in saving the old >>>> >>>> cheap >>>> >>>> o you can re use the wires on it >>>> >> >>>> >> >>>> >> >>>> >> >>>> >> Brian Kulyk >>>> >> 204.887.6988 >>>> >> >>>> >> >>>> >> On Sat, Sep 28, 2013 at 7:11 PM, Benjamin Bergman <b...@benbergman.ca> >>>> >> wrote: >>>> >>> >>>> >>> I just took a look at the sensor and I doubt it can be resoldered. I >>>> >>> was about to get some stuff from digikey, so we can toss a few >>>> >>> sensors >>>> >>> into that order as well. Shipping isn't much and it arrives fast. >>>> >>> I'm >>>> >>> just not sure when our order is going out (should be this week >>>> >>> though). >>>> >>> >>>> >>> On Sat, Sep 28, 2013 at 3:38 PM, Brian Kulyk <br...@kulyk.ca> wrote: >>>> >>> > I just broke off the board, one of the leads is now really small. >>>> >>> > Someone >>>> >>> > might be able to solder it back together, but it's beyond my skill >>>> >>> > level. >>>> >>> > >>>> >>> > I found a mount for a physical switch on thingiverse, we could try >>>> >>> > that >>>> >>> > until the new sensor gets here or until someone with more skill >>>> >>> > than I >>>> >>> > can >>>> >>> > re-solder the old one. >>>> >>> > >>>> >>> > >>>> >>> > >>>> >>> > >>>> >>> > Brian Kulyk >>>> >>> > 204.887.6988 >>>> >>> > >>>> >>> > >>>> >>> > On Sat, Sep 28, 2013 at 3:19 PM, Stefan H.A <stefan...@gmail.com> >>>> >>> > wrote: >>>> >>> >> >>>> >>> >> Yeah that will likely work. I've been looking for a schematic for >>>> >>> >> that >>>> >>> >> board to ensure the hall effect sensor is the same as the one >>>> >>> >> sold at >>>> >>> >> sparkfun but can't seem to find it using my phone though. Odds >>>> >>> >> are >>>> >>> >> very good >>>> >>> >> they are equivalent. >>>> >>> >> >>>> >>> >> Did the actual sensor break or did it just break off the board. >>>> >>> >> If it >>>> >>> >> just >>>> >>> >> broke off the board maybe we can reattach it. >>>> >>> >> >>>> >>> >> On 2013-09-28 2:19 PM, "Brian Kulyk" <br...@kulyk.ca> wrote: >>>> >>> >>> >>>> >>> >>> Unfortunately maker stool works is out of the "Cheap-O Hall >>>> >>> >>> Endstop >>>> >>> >>> Sensor". Perhaps I can just order a new sensor from sparkfun >>>> >>> >>> and >>>> >>> >>> solder it >>>> >>> >>> onto the existing board. >>>> >>> >>> >>>> >>> >>> Thoughts? >>>> >>> >>> >>>> >>> >>> >>>> >>> >>> Brian Kulyk >>>> >>> >>> 204.887.6988 >>>> >>> >>> >>>> >>> >>> >>>> >>> >>> On Sat, Sep 28, 2013 at 2:07 PM, Stefan H.A >>>> >>> >>> <stefan...@gmail.com> >>>> >>> >>> wrote: >>>> >>> >>>> >>>> >>> >>>> If we are ordering something from makerstoolworks.com maybe we >>>> >>> >>>> should >>>> >>> >>>> see if anything changed from the beta kit we got and have that >>>> >>> >>>> included in >>>> >>> >>>> the shipment. Also I think there were some parts that were not >>>> >>> >>>> right >>>> >>> >>>> in the >>>> >>> >>>> original kit we might like to get replaced. >>>> >>> >>>> >>>> >>> >>>> On 2013-09-28 1:37 PM, "Stefan H.A" <stefan...@gmail.com> >>>> >>> >>>> wrote: >>>> >>> >>>>> >>>> >>> >>>>> If you are going to use the 'peice of paper' method you need >>>> >>> >>>>> to >>>> >>> >>>>> remove >>>> >>> >>>>> homing lines from custom gcode section of the slicer config. I >>>> >>> >>>>> beleive the >>>> >>> >>>>> appropriate lines are g28 and g92 z183. >>>> >>> >>>>> >>>> >>> >>>>> On 2013-09-28 1:30 PM, "Stefan H.A" <stefan...@gmail.com> >>>> >>> >>>>> wrote: >>>> >>> >>>>>> >>>> >>> >>>>>> We got the end stop with the kit. A replacement should be >>>> >>> >>>>>> available >>>> >>> >>>>>> from makerstoolworks.com. A microswitch could also be used if >>>> >>> >>>>>> we >>>> >>> >>>>>> can figure >>>> >>> >>>>>> a way to attach it. In the mean time we can still use the >>>> >>> >>>>>> "piece >>>> >>> >>>>>> of paper" >>>> >>> >>>>>> method of zeroing. If you need a refresher check old >>>> >>> >>>>>> revisions of >>>> >>> >>>>>> the wiki. >>>> >>> >>>>>> >>>> >>> >>>>>> This should not have happened. Is it possible the endstop >>>> >>> >>>>>> came >>>> >>> >>>>>> disconnected? I suppose the firmware could have gone insane >>>> >>> >>>>>> when >>>> >>> >>>>>> it froze up >>>> >>> >>>>>> and that is why it didn't obey the endstop. In the future, we >>>> >>> >>>>>> should >>>> >>> >>>>>> probably completely power down and disconnect the usb cable >>>> >>> >>>>>> when >>>> >>> >>>>>> recovering >>>> >>> >>>>>> from a crash to ensure the firmware gets reset. This now >>>> >>> >>>>>> makes me >>>> >>> >>>>>> wonder if >>>> >>> >>>>>> the freezing problem is caused by the firmware and not the >>>> >>> >>>>>> computer. Maybe >>>> >>> >>>>>> we should see if any other user are reporting this and check >>>> >>> >>>>>> if >>>> >>> >>>>>> there is a >>>> >>> >>>>>> more recent version of the Marlin firmware. >>>> >>> >>>>>> >>>> >>> >>>>>> On 2013-09-28 1:05 PM, "Brian Kulyk" <br...@kulyk.ca> wrote: >>>> >>> >>>>>>> >>>> >>> >>>>>>> Somehow I managed to break the z axis end-stop sensor. I >>>> >>> >>>>>>> was >>>> >>> >>>>>>> printing this morning, and the print failed. I hit the >>>> >>> >>>>>>> button to >>>> >>> >>>>>>> disconnect, and reconnected to the printer then hit the z >>>> >>> >>>>>>> home >>>> >>> >>>>>>> button so I >>>> >>> >>>>>>> could remove the failed print. The z axis did NOT stop at 0, >>>> >>> >>>>>>> it >>>> >>> >>>>>>> kept going >>>> >>> >>>>>>> and broke a little black piece off of the z end-stop sensor. >>>> >>> >>>>>>> >>>> >>> >>>>>>> If someone can tell me where we got the sensor from I can go >>>> >>> >>>>>>> and >>>> >>> >>>>>>> get >>>> >>> >>>>>>> or order us another one as soon as possible. >>>> >>> >>>>>>> >>>> >>> >>>>>>> Sorry for the inconvenience. >>>> >>> >>>>>>> >>>> >>> >>>>>>> >>>> >>> >>>>>>> >>>> >>> >>>>>>> Brian Kulyk >>>> >>> >>>>>>> 204.887.6988 >>>> >>> >>>>>>> >>>> >>> >>>>>>> >>>> >>> >>>>>>> On Fri, Sep 27, 2013 at 4:33 PM, Stefan H.A >>>> >>> >>>>>>> <stefan...@gmail.com> >>>> >>> >>>>>>> wrote: >>>> >>> >>>>>>>> >>>> >>> >>>>>>>> Yeah, I think slowing down more and using the fan >>>> >>> >>>>>>>> less(read: >>>> >>> >>>>>>>> almost >>>> >>> >>>>>>>> never) is the solution to the cracks we are getting in some >>>> >>> >>>>>>>> parts. >>>> >>> >>>>>>>> >>>> >>> >>>>>>>> On 2013-09-27 3:12 PM, "d-_-b" <thor.robin...@gmail.com> >>>> >>> >>>>>>>> wrote: >>>> >>> >>>>>>>>> >>>> >>> >>>>>>>>> Parts with fine detail can be run with a lower minimum >>>> >>> >>>>>>>>> speed ( >>>> >>> >>>>>>>>> default 10mm/s ). we ran the second triforce at 1mm/s >>>> >>> >>>>>>>>> minimum >>>> >>> >>>>>>>>> speed and that >>>> >>> >>>>>>>>> was a tad low, but gave us excellent detail. >>>> >>> >>>>>>>>> >>>> >>> >>>>>>>>> >>>> >>> >>>>>>>>> On Fri, Sep 27, 2013 at 10:36 AM, Stefan H.A >>>> >>> >>>>>>>>> <stefan...@gmail.com> >>>> >>> >>>>>>>>> wrote: >>>> >>> >>>>>>>>>> >>>> >>> >>>>>>>>>> I've added some useful links to the tuning section of 3d >>>> >>> >>>>>>>>>> printer >>>> >>> >>>>>>>>>> wiki page. >>>> >>> >>>>>>>>>> >>>> >>> >>>>>>>>>> Based on the 'too cold' section of the trouble shooting >>>> >>> >>>>>>>>>> guide >>>> >>> >>>>>>>>>> I >>>> >>> >>>>>>>>>> beleive we are cooling the part too much with the fan. I >>>> >>> >>>>>>>>>> think >>>> >>> >>>>>>>>>> that when >>>> >>> >>>>>>>>>> printing with ABS the fan should remain off unless >>>> >>> >>>>>>>>>> absolutely >>>> >>> >>>>>>>>>> necessary (ie. >>>> >>> >>>>>>>>>> Very short layers). Thinking back to the triforce, it >>>> >>> >>>>>>>>>> only had >>>> >>> >>>>>>>>>> trouble at >>>> >>> >>>>>>>>>> the very top where the layers were taking only few >>>> >>> >>>>>>>>>> seconds. >>>> >>> >>>>>>>>>> >>>> >>> >>>>>>>>>> On 2013-09-26 12:14 AM, "Stefan H.A" >>>> >>> >>>>>>>>>> <stefan...@gmail.com> >>>> >>> >>>>>>>>>> wrote: >>>> >>> >>>>>>>>>>> >>>> >>> >>>>>>>>>>> Be advised, I changed the infill patern to honeycomb. >>>> >>> >>>>>>>>>>> Don't >>>> >>> >>>>>>>>>>> be >>>> >>> >>>>>>>>>>> alarmed if the printer appears to have a convulsion >>>> >>> >>>>>>>>>>> while >>>> >>> >>>>>>>>>>> printing infill. >>>> >>> >>>>>>>>>>> Do keep an eye out for screws coming loose. >>>> >>> >>>>>>>>>>> >>>> >>> >>>>>>>>>>> I've also set it to print a solid layer every 40 layers. >>>> >>> >>>>>>>>>>> These >>>> >>> >>>>>>>>>>> settings should increase part strength considerably. >>>> >>> >>>>>>>>>>> >>>> >>> >>>>>>>>>>> On 2013-09-24 3:39 PM, "Benjamin Bergman" >>>> >>> >>>>>>>>>>> <b...@benbergman.ca> >>>> >>> >>>>>>>>>>> wrote: >>>> >>> >>>>>>>>>>>> >>>> >>> >>>>>>>>>>>> The second one I linked >>>> >>> >>>>>>>>>>>> (http://www.thingiverse.com/thing:124533) is >>>> >>> >>>>>>>>>>>> basically a proper version of the one that I cobbled >>>> >>> >>>>>>>>>>>> together >>>> >>> >>>>>>>>>>>> months >>>> >>> >>>>>>>>>>>> ago that we are currently using. No disassembly >>>> >>> >>>>>>>>>>>> required to >>>> >>> >>>>>>>>>>>> install >>>> >>> >>>>>>>>>>>> that one. >>>> >>> >>>>>>>>>>>> >>>> >>> >>>>>>>>>>>> It would have been nice if all their end plates had >>>> >>> >>>>>>>>>>>> cutouts >>>> >>> >>>>>>>>>>>> for >>>> >>> >>>>>>>>>>>> t-nuts >>>> >>> >>>>>>>>>>>> to be inserted, like the main back plate has. It would >>>> >>> >>>>>>>>>>>> make >>>> >>> >>>>>>>>>>>> upgrading >>>> >>> >>>>>>>>>>>> things way easier. >>>> >>> >>>>>>>>>>>> >>>> >>> >>>>>>>>>>>> On Tue, Sep 24, 2013 at 3:18 PM, Stefan H.A >>>> >>> >>>>>>>>>>>> <stefan...@gmail.com> wrote: >>>> >>> >>>>>>>>>>>> > Depending where the bracket attaches, the printer may >>>> >>> >>>>>>>>>>>> > need >>>> >>> >>>>>>>>>>>> > to >>>> >>> >>>>>>>>>>>> > be partially >>>> >>> >>>>>>>>>>>> > disassembled to add the t-nuts into the channels >>>> >>> >>>>>>>>>>>> > (looks >>>> >>> >>>>>>>>>>>> > like >>>> >>> >>>>>>>>>>>> > that may be the >>>> >>> >>>>>>>>>>>> > case for the top most screw). I have been looking for >>>> >>> >>>>>>>>>>>> > a >>>> >>> >>>>>>>>>>>> > solution that only >>>> >>> >>>>>>>>>>>> > needs t-nuts in accessable channels. >>>> >>> >>>>>>>>>>>> > >>>> >>> >>>>>>>>>>>> > On 2013-09-24 3:09 PM, "Brian Kulyk" <br...@kulyk.ca> >>>> >>> >>>>>>>>>>>> > wrote: >>>> >>> >>>>>>>>>>>> >> >>>> >>> >>>>>>>>>>>> >> I like the first one Ben suggested >>>> >>> >>>>>>>>>>>> >> (http://www.thingiverse.com/thing:77301/#remixes) >>>> >>> >>>>>>>>>>>> >> >>>> >>> >>>>>>>>>>>> >> >>>> >>> >>>>>>>>>>>> >> Brian Kulyk >>>> >>> >>>>>>>>>>>> >> 204.887.6988 >>>> >>> >>>>>>>>>>>> >> >>>> >>> >>>>>>>>>>>> >> >>>> >>> >>>>>>>>>>>> >> On Tue, Sep 24, 2013 at 1:50 PM, Benjamin Bergman >>>> >>> >>>>>>>>>>>> >> <b...@benbergman.ca> >>>> >>> >>>>>>>>>>>> >> wrote: >>>> >>> >>>>>>>>>>>> >>> >>>> >>> >>>>>>>>>>>> >>> A few more options (all designed to attach to the >>>> >>> >>>>>>>>>>>> >>> MendelMax >>>> >>> >>>>>>>>>>>> >>> 2.0): >>>> >>> >>>>>>>>>>>> >>> http://www.thingiverse.com/thing:77301/#remixes >>>> >>> >>>>>>>>>>>> >>> http://www.thingiverse.com/thing:124533 >>>> >>> >>>>>>>>>>>> >>> http://www.thingiverse.com/thing:78741 >>>> >>> >>>>>>>>>>>> >>> >>>> >>> >>>>>>>>>>>> >>> On Tue, Sep 24, 2013 at 12:33 PM, Stefan H.A >>>> >>> >>>>>>>>>>>> >>> <stefan...@gmail.com> wrote: >>>> >>> >>>>>>>>>>>> >>> > This would probably work but a stand alone spool >>>> >>> >>>>>>>>>>>> >>> > would >>>> >>> >>>>>>>>>>>> >>> > take more space. >>>> >>> >>>>>>>>>>>> >>> > The >>>> >>> >>>>>>>>>>>> >>> > brackets I posted look like they could be >>>> >>> >>>>>>>>>>>> >>> > attached to >>>> >>> >>>>>>>>>>>> >>> > the >>>> >>> >>>>>>>>>>>> >>> > back of >>>> >>> >>>>>>>>>>>> >>> > printer. >>>> >>> >>>>>>>>>>>> >>> > >>>> >>> >>>>>>>>>>>> >>> > On 2013-09-24 11:32 AM, "d-_-b" >>>> >>> >>>>>>>>>>>> >>> > <thor.robin...@gmail.com> >>>> >>> >>>>>>>>>>>> >>> > wrote: >>>> >>> >>>>>>>>>>>> >>> >> >>>> >>> >>>>>>>>>>>> >>> >> http://www.thingiverse.com/thing:52927 <- >>>> >>> >>>>>>>>>>>> >>> >> another >>>> >>> >>>>>>>>>>>> >>> >> option >>>> >>> >>>>>>>>>>>> >>> >> for the >>>> >>> >>>>>>>>>>>> >>> >> spool >>>> >>> >>>>>>>>>>>> >>> >> holder >>>> >>> >>>>>>>>>>>> >>> >> >>>> >>> >>>>>>>>>>>> >>> >> >>>> >>> >>>>>>>>>>>> >>> >> On Mon, Sep 23, 2013 at 12:28 PM, Stefan H.A >>>> >>> >>>>>>>>>>>> >>> >> <stefan...@gmail.com> >>>> >>> >>>>>>>>>>>> >>> >> wrote: >>>> >>> >>>>>>>>>>>> >>> >>> >>>> >>> >>>>>>>>>>>> >>> >>> Some interesting and helpful links I found >>>> >>> >>>>>>>>>>>> >>> >>> surfing >>>> >>> >>>>>>>>>>>> >>> >>> thingiverse and >>>> >>> >>>>>>>>>>>> >>> >>> the >>>> >>> >>>>>>>>>>>> >>> >>> reprap wiki. >>>> >>> >>>>>>>>>>>> >>> >>> >>>> >>> >>>>>>>>>>>> >>> >>> This might work for a spool holder. >>>> >>> >>>>>>>>>>>> >>> >>> >>>> >>> >>>>>>>>>>>> >>> >>> http://www.thingiverse.com/thing:63431 >>>> >>> >>>>>>>>>>>> >>> >>> >>>> >>> >>>>>>>>>>>> >>> >>> Some info about abs and pla. Note the >>>> >>> >>>>>>>>>>>> >>> >>> suggestions >>>> >>> >>>>>>>>>>>> >>> >>> regarding print >>>> >>> >>>>>>>>>>>> >>> >>> surface. >>>> >>> >>>>>>>>>>>> >>> >>> >>>> >>> >>>>>>>>>>>> >>> >>> http://reprap.org/wiki/ABS >>>> >>> >>>>>>>>>>>> >>> >>> >>>> >>> >>>>>>>>>>>> >>> >>> http://reprap.org/wiki/PLA >>>> >>> >>>>>>>>>>>> >>> >>> >>>> >>> >>>>>>>>>>>> >>> >>> Marlin firmware's home page which includes a >>>> >>> >>>>>>>>>>>> >>> >>> list of >>>> >>> >>>>>>>>>>>> >>> >>> implimented G >>>> >>> >>>>>>>>>>>> >>> >>> and M >>>> >>> >>>>>>>>>>>> >>> >>> codes. >>>> >>> >>>>>>>>>>>> >>> >>> >>>> >>> >>>>>>>>>>>> >>> >>> https://github.com/ErikZalm/Marlin >>>> >>> >>>>>>>>>>>> >>> >>> >>>> >>> >>>>>>>>>>>> >>> >>> On 2013-08-28 1:00 PM, "Aemilianus Kehler" >>>> >>> >>>>>>>>>>>> >>> >>> <zew...@gmail.com> wrote: >>>> >>> >>>>>>>>>>>> >>> >>>> >>>> >>> >>>>>>>>>>>> >>> >>>> Stupid huffer, why don't you learn to share? >>>> >>> >>>>>>>>>>>> >>> >>>> >>>> >>> >>>>>>>>>>>> >>> >>>> Cheers!! >>>> >>> >>>>>>>>>>>> >>> >>>> >>>> >>> >>>>>>>>>>>> >>> >>>> On Aug 27, 2013, at 5:04 PM, Justin Lacko >>>> >>> >>>>>>>>>>>> >>> >>>> <jus...@takaji.ca> wrote: >>>> >>> >>>>>>>>>>>> >>> >>>> >>>> >>> >>>>>>>>>>>> >>> >>>> Of course I huffed it all! How else could I >>>> >>> >>>>>>>>>>>> >>> >>>> say I'm >>>> >>> >>>>>>>>>>>> >>> >>>> on >>>> >>> >>>>>>>>>>>> >>> >>>> such a long >>>> >>> >>>>>>>>>>>> >>> >>>> "trip" to "Denmark"? >>>> >>> >>>>>>>>>>>> >>> >>>> >>>> >>> >>>>>>>>>>>> >>> >>>> >>>> >>> >>>>>>>>>>>> >>> >>>> On 27 August 2013 23:59, Jim MacKenzie >>>> >>> >>>>>>>>>>>> >>> >>>> <protoj...@gmail.com> wrote: >>>> >>> >>>>>>>>>>>> >>> >>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>> He probably huffed it all. >>>> >>> >>>>>>>>>>>> >>> >>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>> On Aug 27, 2013 4:58 PM, "Roswyne" >>>> >>> >>>>>>>>>>>> >>> >>>>> <rosw...@gmail.com> >>>> >>> >>>>>>>>>>>> >>> >>>>> wrote: >>>> >>> >>>>>>>>>>>> >>> >>>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>>> Justin had a 1L tin of it, IIRC. I doubt he >>>> >>> >>>>>>>>>>>> >>> >>>>>> took >>>> >>> >>>>>>>>>>>> >>> >>>>>> it >>>> >>> >>>>>>>>>>>> >>> >>>>>> to Denmark! >>>> >>> >>>>>>>>>>>> >>> >>>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>>> On Aug 27, 2013 4:26 PM, "Stefan H.A" >>>> >>> >>>>>>>>>>>> >>> >>>>>> <stefan...@gmail.com> wrote: >>>> >>> >>>>>>>>>>>> >>> >>>>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>>>> I am thinking it might be good to have one >>>> >>> >>>>>>>>>>>> >>> >>>>>>> thread >>>> >>> >>>>>>>>>>>> >>> >>>>>>> for all things >>>> >>> >>>>>>>>>>>> >>> >>>>>>> 3d >>>> >>> >>>>>>>>>>>> >>> >>>>>>> printer so I am starting one. >>>> >>> >>>>>>>>>>>> >>> >>>>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>>>> FYI - I won't be able to make it to the >>>> >>> >>>>>>>>>>>> >>> >>>>>>> space >>>> >>> >>>>>>>>>>>> >>> >>>>>>> until >>>> >>> >>>>>>>>>>>> >>> >>>>>>> sometime >>>> >>> >>>>>>>>>>>> >>> >>>>>>> after >>>> >>> >>>>>>>>>>>> >>> >>>>>>> the meeting, not sure when though. My >>>> >>> >>>>>>>>>>>> >>> >>>>>>> cousin is >>>> >>> >>>>>>>>>>>> >>> >>>>>>> visiting from >>>> >>> >>>>>>>>>>>> >>> >>>>>>> Iceland and >>>> >>> >>>>>>>>>>>> >>> >>>>>>> she is interested in seeing the 3d printer >>>> >>> >>>>>>>>>>>> >>> >>>>>>> so >>>> >>> >>>>>>>>>>>> >>> >>>>>>> I'll >>>> >>> >>>>>>>>>>>> >>> >>>>>>> be bringing >>>> >>> >>>>>>>>>>>> >>> >>>>>>> her along. >>>> >>> >>>>>>>>>>>> >>> >>>>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>>>> Also I hope to pick up some nail polish >>>> >>> >>>>>>>>>>>> >>> >>>>>>> remover >>>> >>> >>>>>>>>>>>> >>> >>>>>>> (acetone) to >>>> >>> >>>>>>>>>>>> >>> >>>>>>> clean >>>> >>> >>>>>>>>>>>> >>> >>>>>>> the print bed and maybe checking out the >>>> >>> >>>>>>>>>>>> >>> >>>>>>> heated >>>> >>> >>>>>>>>>>>> >>> >>>>>>> bed >>>> >>> >>>>>>>>>>>> >>> >>>>>>> as it has >>>> >>> >>>>>>>>>>>> >>> >>>>>>> been acting >>>> >>> >>>>>>>>>>>> >>> >>>>>>> up. >>>> >>> >>>>>>>>>>>> >>> >>>>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>>>> _______________________________________________ >>>> >>> >>>>>>>>>>>> >>> >>>>>>> SkullSpace Discuss Mailing List >>>> >>> >>>>>>>>>>>> >>> >>>>>>> Help: >>>> >>> >>>>>>>>>>>> >>> >>>>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>>>> http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss >>>> >>> >>>>>>>>>>>> >>> >>>>>>> Archive: >>>> >>> >>>>>>>>>>>> >>> >>>>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>>>> https://groups.google.com/group/skullspace-discuss-archive/ >>>> >>> >>>>>>>>>>>> >>> >>>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>>> _______________________________________________ >>>> >>> >>>>>>>>>>>> >>> >>>>>> SkullSpace Discuss Mailing List >>>> >>> >>>>>>>>>>>> >>> >>>>>> Help: >>>> >>> >>>>>>>>>>>> >>> >>>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>>> http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss >>>> >>> >>>>>>>>>>>> >>> >>>>>> Archive: >>>> >>> >>>>>>>>>>>> >>> >>>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>>> https://groups.google.com/group/skullspace-discuss-archive/ >>>> >>> >>>>>>>>>>>> >>> >>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>> _______________________________________________ >>>> >>> >>>>>>>>>>>> >>> >>>>> SkullSpace Discuss Mailing List >>>> >>> >>>>>>>>>>>> >>> >>>>> Help: >>>> >>> >>>>>>>>>>>> >>> >>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>> http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss >>>> >>> >>>>>>>>>>>> >>> >>>>> Archive: >>>> >>> >>>>>>>>>>>> >>> >>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>> >>>> >>> >>>>>>>>>>>> >>> >>>>> https://groups.google.com/group/skullspace-discuss-archive/ >>>> >>> >>>>>>>>>>>> >>> >>>> >>>> >>> >>>>>>>>>>>> >>> >>>> >>>> >>> >>>>>>>>>>>> >>> >>>> >>>> >>> >>>>>>>>>>>> >>> >>>> _______________________________________________ >>>> >>> >>>>>>>>>>>> >>> >>>> SkullSpace Discuss Mailing List >>>> >>> >>>>>>>>>>>> >>> >>>> Help: >>>> >>> >>>>>>>>>>>> >>> >>>> >>>> >>> >>>>>>>>>>>> >>> >>>> >>>> >>> >>>>>>>>>>>> >>> >>>> http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss >>>> >>> >>>>>>>>>>>> >>> >>>> Archive: >>>> >>> >>>>>>>>>>>> >>> >>>> >>>> >>> >>>>>>>>>>>> >>> >>>> >>>> >>> >>>>>>>>>>>> >>> >>>> https://groups.google.com/group/skullspace-discuss-archive/ >>>> >>> >>>>>>>>>>>> >>> >>>> >>>> >>> >>>>>>>>>>>> >>> >>>> >>>> >>> >>>>>>>>>>>> >>> >>>> >>>> >>> >>>>>>>>>>>> >>> >>>> _______________________________________________ >>>> >>> >>>>>>>>>>>> >>> >>>> SkullSpace Discuss Mailing List >>>> >>> >>>>>>>>>>>> >>> >>>> Help: >>>> >>> >>>>>>>>>>>> >>> >>>> >>>> >>> >>>>>>>>>>>> >>> >>>> >>>> >>> >>>>>>>>>>>> >>> >>>> http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss >>>> >>> >>>>>>>>>>>> >>> >>>> Archive: >>>> >>> >>>>>>>>>>>> >>> >>>> >>>> >>> >>>>>>>>>>>> >>> >>>> >>>> >>> >>>>>>>>>>>> >>> >>>> https://groups.google.com/group/skullspace-discuss-archive/ >>>> >>> >>>>>>>>>>>> >>> >>> >>>> >>> >>>>>>>>>>>> >>> >>> >>>> >>> >>>>>>>>>>>> >>> >>> _______________________________________________ >>>> >>> >>>>>>>>>>>> >>> >>> SkullSpace Discuss Mailing List >>>> >>> >>>>>>>>>>>> >>> >>> Help: >>>> >>> >>>>>>>>>>>> >>> >>> >>>> >>> >>>>>>>>>>>> >>> >>> >>>> >>> >>>>>>>>>>>> >>> >>> http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss >>>> >>> >>>>>>>>>>>> >>> >>> Archive: >>>> >>> >>>>>>>>>>>> >>> >>> >>>> >>> >>>>>>>>>>>> >>> >>> >>>> >>> >>>>>>>>>>>> >>> >>> https://groups.google.com/group/skullspace-discuss-archive/ >>>> >>> >>>>>>>>>>>> >>> >> >>>> >>> >>>>>>>>>>>> >>> >> >>>> >>> >>>>>>>>>>>> >>> >> >>>> >>> >>>>>>>>>>>> >>> >> >>>> >>> >>>>>>>>>>>> >>> >> -- >>>> >>> >>>>>>>>>>>> >>> >> -- >>>> >>> >>>>>>>>>>>> >>> >> ) thor.robinson; >>>> >>> >>>>>>>>>>>> >>> >> ) icon/phreshlyspun/ppca/skullspace >>>> >>> >>>>>>>>>>>> >>> >> >>>> >>> >>>>>>>>>>>> >>> >> -----BEGIN GEEK CODE BLOCK----- >>>> >>> >>>>>>>>>>>> >>> >> Version: 3.12 >>>> >>> >>>>>>>>>>>> >>> >> GMU/O/AT/! d- s+:+ a C++++ UL++++ P L+++@ E---- >>>> >>> >>>>>>>>>>>> >>> >> W@ N! >>>> >>> >>>>>>>>>>>> >>> >> o >>>> >>> >>>>>>>>>>>> >>> >> K? w--- >>>> >>> >>>>>>>>>>>> >>> >> O- M-- V? PS+++ PEY+ PGP+ t+ 5+ X R tv++ DI++ >>>> >>> >>>>>>>>>>>> >>> >> D++ G+ >>>> >>> >>>>>>>>>>>> >>> >> e* >>>> >>> >>>>>>>>>>>> >>> >> h-- r y+ z+ >>>> >>> >>>>>>>>>>>> >>> >> ------END GEEK CODE BLOCK------ >>>> >>> >>>>>>>>>>>> >>> >> >>>> >>> >>>>>>>>>>>> >>> >> _______________________________________________ >>>> >>> >>>>>>>>>>>> >>> >> SkullSpace Discuss Mailing List >>>> >>> >>>>>>>>>>>> >>> >> Help: >>>> >>> >>>>>>>>>>>> >>> >> >>>> >>> >>>>>>>>>>>> >>> >> >>>> >>> >>>>>>>>>>>> >>> >> http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss >>>> >>> >>>>>>>>>>>> >>> >> Archive: >>>> >>> >>>>>>>>>>>> >>> >> >>>> >>> >>>>>>>>>>>> >>> >> >>>> >>> >>>>>>>>>>>> >>> >> https://groups.google.com/group/skullspace-discuss-archive/ >>>> >>> >>>>>>>>>>>> >>> > >>>> >>> >>>>>>>>>>>> >>> > >>>> >>> >>>>>>>>>>>> >>> > _______________________________________________ >>>> >>> >>>>>>>>>>>> >>> > SkullSpace Discuss Mailing List >>>> >>> >>>>>>>>>>>> >>> > Help: >>>> >>> >>>>>>>>>>>> >>> > >>>> >>> >>>>>>>>>>>> >>> > >>>> >>> >>>>>>>>>>>> >>> > http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss >>>> >>> >>>>>>>>>>>> >>> > Archive: >>>> >>> >>>>>>>>>>>> >>> > >>>> >>> >>>>>>>>>>>> >>> > >>>> >>> >>>>>>>>>>>> >>> > https://groups.google.com/group/skullspace-discuss-archive/ >>>> >>> >>>>>>>>>>>> >>> _______________________________________________ >>>> >>> >>>>>>>>>>>> >>> SkullSpace Discuss Mailing List >>>> >>> >>>>>>>>>>>> >>> Help: >>>> >>> >>>>>>>>>>>> >>> >>>> >>> >>>>>>>>>>>> >>> >>>> >>> >>>>>>>>>>>> >>> http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss >>>> >>> >>>>>>>>>>>> >>> Archive: >>>> >>> >>>>>>>>>>>> >>> >>>> >>> >>>>>>>>>>>> >>> >>>> >>> >>>>>>>>>>>> >>> https://groups.google.com/group/skullspace-discuss-archive/ >>>> >>> >>>>>>>>>>>> >> >>>> >>> >>>>>>>>>>>> >> >>>> >>> >>>>>>>>>>>> >> >>>> >>> >>>>>>>>>>>> >> _______________________________________________ >>>> >>> >>>>>>>>>>>> >> SkullSpace Discuss Mailing List >>>> >>> >>>>>>>>>>>> >> Help: >>>> >>> >>>>>>>>>>>> >> >>>> >>> >>>>>>>>>>>> >> >>>> >>> >>>>>>>>>>>> >> http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss >>>> >>> >>>>>>>>>>>> >> Archive: >>>> >>> >>>>>>>>>>>> >> >>>> >>> >>>>>>>>>>>> >> >>>> >>> >>>>>>>>>>>> >> https://groups.google.com/group/skullspace-discuss-archive/ >>>> >>> >>>>>>>>>>>> > >>>> >>> >>>>>>>>>>>> > >>>> >>> >>>>>>>>>>>> > _______________________________________________ >>>> >>> >>>>>>>>>>>> > SkullSpace Discuss Mailing List >>>> >>> >>>>>>>>>>>> > Help: >>>> >>> >>>>>>>>>>>> > >>>> >>> >>>>>>>>>>>> > >>>> >>> >>>>>>>>>>>> > http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss >>>> >>> >>>>>>>>>>>> > Archive: >>>> >>> >>>>>>>>>>>> > >>>> >>> >>>>>>>>>>>> > >>>> >>> >>>>>>>>>>>> > https://groups.google.com/group/skullspace-discuss-archive/ >>>> >>> >>>>>>>>>>>> _______________________________________________ >>>> >>> >>>>>>>>>>>> SkullSpace Discuss Mailing List >>>> >>> >>>>>>>>>>>> Help: >>>> >>> >>>>>>>>>>>> >>>> >>> >>>>>>>>>>>> http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss >>>> >>> >>>>>>>>>>>> Archive: >>>> >>> >>>>>>>>>>>> >>>> >>> >>>>>>>>>>>> https://groups.google.com/group/skullspace-discuss-archive/ >>>> >>> >>>>>>>>>> >>>> >>> >>>>>>>>>> >>>> >>> >>>>>>>>>> _______________________________________________ >>>> >>> >>>>>>>>>> SkullSpace Discuss Mailing List >>>> >>> >>>>>>>>>> Help: >>>> >>> >>>>>>>>>> >>>> >>> >>>>>>>>>> http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss >>>> >>> >>>>>>>>>> Archive: >>>> >>> >>>>>>>>>> >>>> >>> >>>>>>>>>> https://groups.google.com/group/skullspace-discuss-archive/ >>>> >>> >>>>>>>>> >>>> >>> >>>>>>>>> >>>> >>> >>>>>>>>> >>>> >>> >>>>>>>>> >>>> >>> >>>>>>>>> -- >>>> >>> >>>>>>>>> -- >>>> >>> >>>>>>>>> ) thor.robinson; >>>> >>> >>>>>>>>> ) icon/phreshlyspun/ppca/skullspace >>>> >>> >>>>>>>>> >>>> >>> >>>>>>>>> -----BEGIN GEEK CODE BLOCK----- >>>> >>> >>>>>>>>> Version: 3.12 >>>> >>> >>>>>>>>> GMU/O/AT/! d- s+:+ a C++++ UL++++ P L+++@ E---- W@ N! o K? >>>> >>> >>>>>>>>> w--- >>>> >>> >>>>>>>>> O- M-- V? PS+++ PEY+ PGP+ t+ 5+ X R tv++ DI++ D++ G+ e* >>>> >>> >>>>>>>>> h-- r >>>> >>> >>>>>>>>> y+ z+ >>>> >>> >>>>>>>>> ------END GEEK CODE BLOCK------ >>>> >>> >>>>>>>>> >>>> >>> >>>>>>>>> _______________________________________________ >>>> >>> >>>>>>>>> SkullSpace Discuss Mailing List >>>> >>> >>>>>>>>> Help: >>>> >>> >>>>>>>>> >>>> >>> >>>>>>>>> http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss >>>> >>> >>>>>>>>> Archive: >>>> >>> >>>>>>>>> >>>> >>> >>>>>>>>> https://groups.google.com/group/skullspace-discuss-archive/ >>>> >>> >>>>>>>> >>>> >>> >>>>>>>> >>>> >>> >>>>>>>> _______________________________________________ >>>> >>> >>>>>>>> SkullSpace Discuss Mailing List >>>> >>> >>>>>>>> Help: >>>> >>> >>>>>>>> >>>> >>> >>>>>>>> http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss >>>> >>> >>>>>>>> Archive: >>>> >>> >>>>>>>> https://groups.google.com/group/skullspace-discuss-archive/ >>>> >>> >>>>>>> >>>> >>> >>>>>>> >>>> >>> >>>>>>> >>>> >>> >>>>>>> _______________________________________________ >>>> >>> >>>>>>> SkullSpace Discuss Mailing List >>>> >>> >>>>>>> Help: >>>> >>> >>>>>>> http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss >>>> >>> >>>>>>> Archive: >>>> >>> >>>>>>> https://groups.google.com/group/skullspace-discuss-archive/ >>>> >>> >>>> >>>> >>> >>>> >>>> >>> >>>> _______________________________________________ >>>> >>> >>>> SkullSpace Discuss Mailing List >>>> >>> >>>> Help: >>>> >>> >>>> http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss >>>> >>> >>>> Archive: >>>> >>> >>>> https://groups.google.com/group/skullspace-discuss-archive/ >>>> >>> >>> >>>> >>> >>> >>>> >>> >>> >>>> >>> >>> _______________________________________________ >>>> >>> >>> SkullSpace Discuss Mailing List >>>> >>> >>> Help: >>>> >>> >>> http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss >>>> >>> >>> Archive: >>>> >>> >>> https://groups.google.com/group/skullspace-discuss-archive/ >>>> >>> >> >>>> >>> >> >>>> >>> >> _______________________________________________ >>>> >>> >> SkullSpace Discuss Mailing List >>>> >>> >> Help: >>>> >>> >> http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss >>>> >>> >> Archive: >>>> >>> >> https://groups.google.com/group/skullspace-discuss-archive/ >>>> >>> > >>>> >>> > >>>> >>> > >>>> >>> > _______________________________________________ >>>> >>> > SkullSpace Discuss Mailing List >>>> >>> > Help: http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss >>>> >>> > Archive: >>>> >>> > https://groups.google.com/group/skullspace-discuss-archive/ >>>> >>> _______________________________________________ >>>> >>> SkullSpace Discuss Mailing List >>>> >>> Help: http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss >>>> >>> Archive: https://groups.google.com/group/skullspace-discuss-archive/ >>>> >> >>>> >> >>>> >> >>>> >> _______________________________________________ >>>> >> SkullSpace Discuss Mailing List >>>> >> Help: http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss >>>> >> Archive: https://groups.google.com/group/skullspace-discuss-archive/ >>>> > >>>> > >>>> > _______________________________________________ >>>> > SkullSpace Discuss Mailing List >>>> > Help: http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss >>>> > Archive: https://groups.google.com/group/skullspace-discuss-archive/ >>>> _______________________________________________ >>>> SkullSpace Discuss Mailing List >>>> Help: http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss >>>> Archive: https://groups.google.com/group/skullspace-discuss-archive/ >>> >>> >>> _______________________________________________ >>> SkullSpace Discuss Mailing List >>> Help: http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss >>> Archive: https://groups.google.com/group/skullspace-discuss-archive/ >> >> > > > _______________________________________________ > SkullSpace Discuss Mailing List > Help: http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss > Archive: https://groups.google.com/group/skullspace-discuss-archive/ _______________________________________________ SkullSpace Discuss Mailing List Help: http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss Archive: https://groups.google.com/group/skullspace-discuss-archive/
