One happy Transporter owner, again. With help from this post, i was able to resurrect my Transporter by too removing the 5v power board and connecting to a bench power supply. I tested the output of the board with a multi-meter and confirmed that it was not producing anything over 1v. Before ordering a replacement supply, I wanted to test with the bench source to ensure there was not some other larger issue. and Bingo.. lit up when i applied 120VAC and also enabled the 5v supply. My "beige board" was a little different, but was able to confirm the polarity of the 5v connector on the same site as the supply others have in their boxes. Mine was a Unifive UOB310 (PDF: http://www.unifive.us/sites/default/files/OF12WUOB121.pdf) I don't see an easy way to buy a direct replacement, but found a power supply on amazon for 7.39usd that looks like it will work.
Thanks to you all!!! ------------------------------------------------------------------------ bluebeeryale's Profile: http://forums.slimdevices.com/member.php?userid=38513 View this thread: http://forums.slimdevices.com/showthread.php?t=100509 _______________________________________________ diy mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/diy
