In a message dated 98-05-27 20:30:32 EDT, you write:
<< I have the same problem with my HAPI starter. Right now I'm trying to
solve the problem with a bigger battery. If that doesn't work then I'll
probably work with Steve Bennett. But, I'm always interested in others
ideas.
Carl in Atlanta. >>
Carl:
A bigger battery will not solve the problem , the Hapi/ Bosh starter is
grossly overloaded. The geared starter draws less current my battery is a 14
amp motorcycle battery and blows wind off the prop with only the starter
turning it. The old starter could hardly turn it over and drained the battery.
I have a drawing of my template in SurfCam the program I used to program the
mill to cut it out with, I had to rotate my mag 180 degrees to clear
everything.
Do you guys that want starter adapters have acess to computer controlled
milling machines?
One Sky Dog
-----------------------------------------------------------------------------
dragonlist is hosted courtesy of Interstice Inc., a provider of reasonably
priced virtual domain hosting for the world, and dedicated circuit and
dialup for Silicon Valley. http://www.interstice.com (408) 369-4490
