[EMAIL PROTECTED] wrote:
>
> In a message dated 98-05-27 20:30:32 EDT, you write:
>
> << I have the same problem with my HAPI starter. Right now I'm trying to
> solve the problem with a bigger battery. If that doesn't work then I'll
> probably work with Steve Bennett. But, I'm always interested in others
> ideas.
>
> Carl in Atlanta. >>
>
> Carl:
> A bigger battery will not solve the problem , the Hapi/ Bosh starter is
> grossly overloaded. The geared starter draws less current my battery is a 14
> amp motorcycle battery and blows wind off the prop with only the starter
> turning it. The old starter could hardly turn it over and drained the battery.
>
> I have a drawing of my template in SurfCam the program I used to program the
> mill to cut it out with, I had to rotate my mag 180 degrees to clear
> everything.
>
> Do you guys that want starter adapters have acess to computer controlled
> milling machines?
>
> One Sky Dog
> -----------------------------------------------------------------------------
> dragonlist is hosted courtesy of Interstice Inc., a provider of reasonably
> priced virtual domain hosting for the world, and dedicated circuit and
> dialup for Silicon Valley. http://www.interstice.com (408) 369-4490
No I don't have access to a milling machine. But I have plenty of
hacksaws, files and elbow grease.
Send a picture.
Carl
-----------------------------------------------------------------------------
dragonlist is hosted courtesy of Interstice Inc., a provider of reasonably
priced virtual domain hosting for the world, and dedicated circuit and
dialup for Silicon Valley. http://www.interstice.com (408) 369-4490
