>
>Time to play hard ball!
>
>I pulled the top off my Dock.
>I plugged in the motherboard all by itself. It boots just fine.
>I connect the RAM. It boots just fine.
>I connect the SCSI hard drive. It boots just fine.
>I launch drive setup and Simple Text. No problem.
>I connect the modem card. It boots just fine.
>Everything seems to function normally.
>
>Then I put everything back into the bottom plastic with the chassis
>(installing the screws to hold it together just as before), insert it into
>the Duo Dock hit the power button...STROBE SOUND AGAIN!
>
>I tried variations of the bottom plastic (I have 3 of them) and chassis (I
>have 3 of them). Same strobe.
>
>I'm totally baffled. All suggestions will be most welcome. Thanks!
>
>-makmac
>
Maybe a short somewhere to the frame ? When you put it all together,
it forces contact to something. Take a look at the motherboard for
any scratches on the surface that allow contact to unshielded traces.
Also look for any cracked solder welds.
Mad Dog
----------
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http://www.sineware.com/mac2400>
To unsubscribe, E-mail to: <[EMAIL PROTECTED]>
To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]>
Need help from a real person? Try. <[EMAIL PROTECTED]>
----------
Dr. Bott | 10/100 Ethernet for your 2400 is finally here!
MPC-100 | <http://www.drbott.com/prod/mpc100.html>
NineWire | If they are cool enough to host this list...
Digital Solutions | ...you should check them out! http://www.NineWire.com/
Midwest Mac Parts ][ <http://www.midwestmac.com>
After-market parts for Macs. ][ 888-356-1104 ][
MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879!
Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
