One thing you said reminded me of what happened to my duo 2300c. When I pressed on
my 2300 and kept pressure on it it would work great until I released the pressure
then it would die. It turned out that when I looked closely at the 603 processor on
the mother board one of the very tiny metal tabs that go down and attach the
processor to the board looked funny... I used a magnifying lens to look more closely
and it looked like it had corroded and caused a crack when pressure was applied it
caused the board to bow, made contact and would run. If there had been some way for
me to solder something that tiny I might have been able to fix it, but I just had to
buy a replacement board. Just something else for you to check...Willie
"Mark A. Kippert" wrote:
He said sometimes it would boot if you pressed on the right side around the hinge...
Anyway, I disassembled it and discovered that it has been upgraded with a PPC2300
motherboard! ...
----------
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http://www.sineware.com/mac2400>
To unsubscribe, E-mail to: <[EMAIL PROTECTED]>
To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]>
Need help from a real person? Try. <[EMAIL PROTECTED]>
----------
Dr. Bott | 10/100 Ethernet for your 2400 is finally here!
MPC-100 | <http://www.drbott.com/prod/mpc100.html>
NineWire | If they are cool enough to host this list...
Digital Solutions | ...you should check them out! http://www.NineWire.com/
Midwest Mac Parts ][ <http://www.midwestmac.com>
After-market parts for Macs. ][ 888-356-1104 ][
MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879!
Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
