Thanks Brendan for sharing the info on this. Regards, Courtney
----- Original Message ----- From: "Brendan Minish" <[EMAIL PROTECTED]> To: "Jack" <[EMAIL PROTECTED]>; "Ron Stordahl" <[EMAIL PROTECTED]>; <[email protected]> Sent: Wednesday, November 06, 2002 8:24 PM Subject: Re: [DXBase] Two Telnet windows? > At 19:30 06/11/2002 -0500, Jack wrote: > >Ron, > > > >I'm really not certain how Windows will react, I don't have a Win2000 to try > >this with right now. But, if you have such a system it would be easy enough > >to try the recommendations that were listed in the help file and try leaving > >it set that way with the internal CW feature turned off. > > > In my case DXB 2003 installed driverX when I first installed. took me ages > to find out what had broken suspend/resume (& a few other things ) > However under win2k it is real easy to stop driverX and as long as your are > not using DXB for CW sending this should not cause problems > > Do the following > > Right Click on ' My computer ' and select ' Manage ' > Select ' device manager' in the right hand side of the computer management > window > Left click on view (top menu bar of computer management window) and select > ' show hidden devices ' > On the right hand side of the ' computer management pane ' (now showing the > various devices ) select ' non plug and play drivers ' > scroll down and find DriverX > Double click DriverX and select the Driver tab > * select Stop (Stops the driver for this session) > Choose Startup disabled (stops the driver being loaded following next boot ) > > Close the Computer management window > > suspend resume should now be working again ( no need for a reboot if you > stopped the driver * ) > > this works fine and means that dirverX can be re-enabled if required. > > > > > 73 > Brendan EI6IZ > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase
