Ron Forgive the implication of stupidity :-), but you are connected to the correct bnc connector on the back of the P3 are you?
Stephen G4SJP On 09/11/2010 20:40, "Ron Hahn (EI2JP)" <[email protected]> wrote: > > Greetings Fellow Elecrafters, > > With great anticipation I finally got around to assembling my P3 (SN 211) last > weekend. Assembly went great and power on tests were encouraging. > > Unfortunately, it fails to display any output from the IF output port on my > K3. Nothing. Every function seems to work just fine except that S9 signals > on 30m (freq displayed OK) do not show anything on the display. > > So, I first thought that maybe I had a bad interconnect cable so tried another > ... nothing. > > Moved the frequency knob of the K3 around ... frequency display tracks the > VFO. > > Tried every function on the P3 ... everything appears to work fine. > > I have not made the +10dB mod to my transverter board nor have I upgraded the > firmware in the P3 from factory (0.28). > > I am now wondering if I have a busted IF output or (sigh) a faulty P3?? > > Suggestions on how to troubleshoot this further please? > > Ron > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
