Ron, do you see the baseline? If not it´s probably a wrong adjusted reference Level. This happened to me, when I started
73/2 de Peter, DL2FI > -----Ursprüngliche Nachricht----- > Von: [email protected] [mailto:elecraft- > [email protected]] Im Auftrag von Ron Hahn (EI2JP) > Gesendet: Dienstag, 9. November 2010 21:40 > An: [email protected] > Betreff: [Elecraft] P3 not displaying any signal {wexp3} > > Greetings Fellow Elecrafters, > > With great anticipation I finally got around to assembling my P3 (SN > 211) last weekend. Assembly went great and power on tests were > encouraging. > > Unfortunately, it fails to display any output from the IF output port > on my K3. Nothing. Every function seems to work just fine except that > S9 signals on 30m (freq displayed OK) do not show anything on the > display. > > So, I first thought that maybe I had a bad interconnect cable so tried > another ... nothing. > > Moved the frequency knob of the K3 around ... frequency display tracks > the VFO. > > Tried every function on the P3 ... everything appears to work fine. > > I have not made the +10dB mod to my transverter board nor have I > upgraded the firmware in the P3 from factory (0.28). > > I am now wondering if I have a busted IF output or (sigh) a faulty P3?? > > Suggestions on how to troubleshoot this further please? > > Ron > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
