Thanks to all the responders. Unhappily I haven't yet found the problem: Here's what's been suggested:
"I would wager that you have your CW pitch set to 650 Hz, either in the K3 or in DX4WIN or both." I believe it is set to 650, but I can't find anything that would cause the spot offset. "Try changing CONFIG CW WGHT. TAP1 to not have CW+SSB in the window." I tried this with the settings of both CW+SSB and CW-SSB but didn't fix the problem. "Turn CONFIG: VFO OFS - OFF." It was OFF. "What version of K3 software are you using?" MCU 04.22, FPF 01.14, DSP1 02.70 ( all current). Thanks to all, Wayne N1WR > On 1/11/2011 1:58 PM, Wayne Rogers wrote: >> I got no help from the DX4WIN reflector on this. Maybe (hopefully) >> someone here can help? >> >> I use DX4WIN 8.08 and a K3. I have been experiencing an oddity that I >> have >> not been able to resolve: >> >> With K3 tuned to 3500.0, if I double click on a spot at 3503.5 the K3 >> goes >> to 3503.5. No problem. >> >> With the K3 in the CW portion of the band (e.g. 3503.5) if I double click >> on >> a spot at 3800.0 the K3 goes to 3800.65. >> >> With the radio in the SSB portion of the band (e.g. 3800.0) if I double >> click on a spot at 3503.5 the K3 goes to 3502.85. >> >> I am getting a 650 Hz offset whenever the K3 changes modes. This happens >> in >> DX4WIN, but not in N1MM. >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
