Problem solved - thanks to Dave, N4QS. Under CONFIG CW WGHT - tapping 5 toggles between VFO offset on SSB/CW mode change (VFO OFS) or no offset (VFO NOR, default). After Dave pointed this out I went to the pdf version of the manual and sure enough - it included this option. I guess I need to toss the old (outdated) hard copy manual I got with the radio!
73, Wayne Wayne Rogers wrote: > Thanks to all the responders. Unhappily I haven't yet found the problem: > Here's what's been suggested: > > "I would wager that you have your CW pitch set to 650 Hz, either in the > K3 > or in DX4WIN or both." I believe it is set to 650, but I can't find > anything that would cause the spot offset. > > "Try changing CONFIG CW WGHT. TAP1 to not have CW+SSB in the window." I > tried this with the settings of both CW+SSB and CW-SSB but didn't fix the > problem. > > "Turn CONFIG: VFO OFS - OFF." It was OFF. > > "What version of K3 software are you using?" MCU 04.22, FPF 01.14, DSP1 > 02.70 ( all current). > > Thanks to all, > > Wayne N1WR > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html