I am running K3 remotely using TRX Manager. When in the 2.8 filter the shift display is centered on the TRX display, and display below shows 2800. When switching to 2.1, the shift display is still centered. I did notice that the width control slider moves up (by itself), and width display at bottom goes from 2800 to 2100. I did not manually change the width control. So in this situation, I have to move the shift slider to offset from being centered. This is an inconvenience when switching back and forth between filters.
I am not at my K3, so can't check what happens when I just change filters, whether same as above (requiring shift), or not. -- View this message in context: http://elecraft.365791.n2.nabble.com/Need-to-shift-8-pole-2-1-filter-tp6273972p6274222.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
