Oh, remote controlled... That would be the app programmer's issue, not Elecraft. TRX Manager does not appear to acknowledge any support for Elecraft on their web page. Sort of whatever works, fine, whatever doesn't, too bad attitude, if they even care. Just marginal support for TenTec.
I believe you need to negotiate a feature with the programmer of TRX Manager. Like maybe supporting Elecraft outright? You can program a macro to set your preferred shift setting IF you can send a macro string to the K3. See the current K3 programmer's guide. BW2100;IF1350; if you want to start hearing at 300 Hz. You want to base your choice of rigs on the 3rd party software, or base your choice of 3rd party software on your rig? If you attempt to solve this by setting the filter calibration offset in the K3 utility, it will work OK for one sideband, but turn the other into Donald Duck. Don't go there. That is only establishing for the rig where the crystal's center frequency actually is, so it can respond to offsetting commands in the firmware. 73, Guy. On Thu, Apr 14, 2011 at 4:09 PM, kcflyers <[email protected]> wrote: > I am running K3 remotely using TRX Manager. When in the 2.8 filter the shift > display is centered on the TRX display, and display below shows 2800. When > switching to 2.1, the shift display is still centered. I did notice that > the width control slider moves up (by itself), and width display at bottom > goes from 2800 to 2100. I did not manually change the width control. So > in this situation, I have to move the shift slider to offset from being > centered. This is an inconvenience when switching back and forth between > filters. > > I am not at my K3, so can't check what happens when I just change filters, > whether same as above (requiring shift), or not. > > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/Need-to-shift-8-pole-2-1-filter-tp6273972p6274222.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
