Out in plain view: http://www.trx-manager.com/FTmane.htm
On Thu, Apr 14, 2011 at 7:53 PM, John and Judy Raydo <[email protected]>wrote: > TRX Manager is highly customized and fully supported for K3. Not sure > where you looked. > > Anyway, I now agree with you that shifting filter offset would just add > LSB/USB problems. > > Thanks for comments. JOhn. > > --- On *Thu, 4/14/11, Guy Olinger K2AV <[email protected]>* wrote: > > > From: Guy Olinger K2AV <[email protected]> > Subject: Re: [Elecraft] Need to shift 8 pole 2.1 filter? > To: "kcflyers" <[email protected]> > Cc: [email protected] > Date: Thursday, April 14, 2011, 6:36 PM > > > Oh, remote controlled... That would be the app programmer's issue, > not Elecraft. TRX Manager does not appear to acknowledge any support > for Elecraft on their web page. Sort of whatever works, fine, > whatever doesn't, too bad attitude, if they even care. Just marginal > support for TenTec. > > I believe you need to negotiate a feature with the programmer of TRX > Manager. Like maybe supporting Elecraft outright? You can program a > macro to set your preferred shift setting IF you can send a macro > string to the K3. See the current K3 programmer's guide. > BW2100;IF1350; if you want to start hearing at 300 Hz. > > You want to base your choice of rigs on the 3rd party software, or > base your choice of 3rd party software on your rig? > > If you attempt to solve this by setting the filter calibration offset > in the K3 utility, it will work OK for one sideband, but turn the > other into Donald Duck. Don't go there. That is only establishing for > the rig where the crystal's center frequency actually is, so it can > respond to offsetting commands in the firmware. > > 73, Guy. > > > On Thu, Apr 14, 2011 at 4:09 PM, kcflyers > <[email protected]<http://us.mc1147.mail.yahoo.com/mc/[email protected]>> > wrote: > > I am running K3 remotely using TRX Manager. When in the 2.8 filter the > shift > > display is centered on the TRX display, and display below shows 2800. > When > > switching to 2.1, the shift display is still centered. I did notice that > > the width control slider moves up (by itself), and width display at > bottom > > goes from 2800 to 2100. I did not manually change the width control. > So > > in this situation, I have to move the shift slider to offset from being > > centered. This is an inconvenience when switching back and forth between > > filters. > > > > I am not at my K3, so can't check what happens when I just change > filters, > > whether same as above (requiring shift), or not. > > > > -- > > View this message in context: > http://elecraft.365791.n2.nabble.com/Need-to-shift-8-pole-2-1-filter-tp6273972p6274222.html > > Sent from the Elecraft mailing list archive at Nabble.com. > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: > > mailto:[email protected]<http://us.mc1147.mail.yahoo.com/mc/[email protected]> > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
