Ray, I believe all you will see in PSK-D is the idle tone. That is only for use with the paddles for input or the K3 Utility, or there is one other program that sends ASCII text to the K3 in that data submode. Go back to DATA A. If you need to determine whether the soundcard is sending data out, find one of those small iPod amplifiers having a 3.5mm stereo jack on it and plug the audio cable into that instead of the K3. If you hear sound, plug it back into the K3, but if it is silent, then go back to your software application and fix it so your can get sound out.
73, Don W3FPR On 3/7/2012 1:25 PM, Ray G3XLG wrote: > Hi Richard > > More replies, I'm afraid! > > However, changing from DATA-A to PSK-D on the K3 does appear to give full > output with no trouble! > > I'll check it in the morning with a local HAM to see if in fact it was > giving out a true PSK31 signal!!! > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
