Phil, Setting the SignaLink jumper to increase the gain of the TX signal is necessary (as explained by Don). My settings: SignaLink USB TX knob set to 13 o'clock and K3 Mic Line level set to 30.
73, Heinz HB9BCB Phil Hystad-3 wrote > > I use the Signalink with the K3 and I found that I had to have a larger > line level output from the Signalink. Inside the Signalink is a jumper > that allows you to switch to a higher voltage. Before I did this, the > level was not high enough to drive the K3. I don't know if this is a > universal problem or something that merely worked for me in my > configuration. > > 73, phil, K7PEH > > -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-a-few-new-user-questions-tp7348177p7352152.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
