Phil, This is not a problem at all, but it is a matter of audio levels as well as knowing your equipment.
The SignaLink is capable of providing either Line level audio or Microphone level audio. The SignaLink off-the-shelf is plugged for microphone level audio. If you choose to use a Line level input to the transceiver, you must change the jumper - not a problem, it is just one of those "facts of life". 73, Don W3FPR On 3/7/2012 9:44 AM, Phil Hystad wrote: > I use the Signalink with the K3 and I found that I had to have a larger line > level output from the Signalink. Inside the Signalink is a jumper that > allows you to switch to a higher voltage. Before I did this, the level was > not high enough to drive the K3. I don't know if this is a universal problem > or something that merely worked for me in my configuration. > > 73, phil, K7PEH > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
