I use the Signalink with the K3 and I found that I had to have a larger line level output from the Signalink. Inside the Signalink is a jumper that allows you to switch to a higher voltage. Before I did this, the level was not high enough to drive the K3. I don't know if this is a universal problem or something that merely worked for me in my configuration.
73, phil, K7PEH On Mar 7, 2012, at 6:32 AM, Ray Spreadbury wrote: > Don > They were already set to OFF OFF in CONFIG: PTT--KEY, enabled VOX but still > same result - no power output! > Ray > > -----Original Message----- > From: Don Wilhelm [mailto:[email protected]] > Sent: 07 March 2012 13:39 > To: Ray G3XLG > Cc: [email protected] > Subject: Re: [Elecraft] K3 a few new user questions > > Ray, > > Check your CONFIG: PTT -- KEY menu entry and set it to OFF -- OFF then use > VOX when using Data modes. > Yes it is likely that the computer and/or MicroHam is setting either DRT or > RTS (or both) on. > > 73, > Don W3FPR > > On 3/7/2012 8:23 AM, Ray G3XLG wrote: >> However whilst MVARI in N1MM decodes PSK31 signals fine, when i try to >> transmit I get no power output& instead I get a couple of error >> messages on the K3 - Error PTT , Error KEY which in the K3 manual >> saysits usually caused by an external device (the MicroHAM MKII?) shorting > KEY or PTT to ground. >> I've obviously got something setup wrong in either N1MM config or in >> the MKII router. Any ideas please? >> Ray, G3XLG >> >> >> ----- >> Ray G3XLG >> > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
