OK, Phil. Let me know if this works. Wayne
On Jan 20, 2014, at 6:01 PM, Phil Theis <[email protected]> wrote: > Wayne, > I hadn't noticed that when I first set this up (years ago). I will try, > don't see why not. Only exception is that my 6m is TRN, but that shouldn't > matter since I won't use the KPA on 6m. > Thanks, > Phil K3TUF > > On 1/20/2014 8:50 PM, Wayne Burdick wrote: >> Phil, >> >> Could use use the HF-TRN setting of the BAND outputs? (Page 19 of the K3 >> owner's manual, right column, first paragraph.) >> >> This setting was specifically included to handle the situation where both HF >> and VHF band switching is required. Further details are provided on this >> page. >> >> If that doesn't work, and you really have to use the TRN setting, you have >> two other band-switching options for the KPA500: its own front-panel >> switches, and RF sensing. >> >> 73, >> Wayne >> N6KR >> >> >> >> On Jan 20, 2014, at 5:31 PM, Phil Theis <[email protected]> wrote: >> >>> Thanks Jack, then I must be changing my KIO3 Setting back and forth between >>> TRN and Normal based on HF use or VHF use? right >>> Phil K3TUF >>> >>> On 1/20/2014 8:28 PM, Jack Brindle wrote: >>>> The KPA only talks on the Auxbus, it does not listen. So yes, the four >>>> BAND signals are needed. >>>> >>>> Jack Brindle, W6FB >>>> >>>> Sent from my iPhone >>>> >>>>> On Jan 20, 2014, at 5:23 PM, Phil Theis <[email protected]> wrote: >>>>> >>>>> In the KPA cable going to the K3 the band data lines are called out, yet >>>>> there is no discussion about instructing the K3 firmware to set band >>>>> data. My band data is used for transverters with Config:KIO3 set to >>>>> TRN. If these lines are not used and band information is derived from >>>>> AUXBUS, then do we really need the four band lines in the cable going >>>>> from KPA to K3? >>>>> thanks, >>>>> Phil K3TUF >>>>> >>>>> ______________________________________________________________ >>>>> Elecraft mailing list >>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>>>> Help: http://mailman.qth.net/mmfaq.htm >>>>> Post: mailto:[email protected] >>>>> >>>>> This list hosted by: http://www.qsl.net >>>>> Please help support this email list: http://www.qsl.net/donate.html >>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:[email protected] >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
