Don,
Can't argue with the advice in your email; in fact, I think the best response I
have read.
As for "how you sound" on the other end, one setting no one mentioned is
transmitter equalizer settings. I could be wrong, but from what I remember,
Heil used to sell mics with a freq response tailored to communications. Now,
with all the new rigs having the ability to adjust the frequency response to
match your voice, the new mics are wide range (pro 10 specs are, "Producing
full articulate sound from 85Hz to 16kHz". Now, you can adjust the freq
response of your rig to match your voice.
Having said the above, I have to admit I haven't "played" with the equalizer,
so my settings are 0 dB across the board. Might be interesting to hear from a
few of you that have made changes, how you evaluated your changes, and (in the
long run) have you found it made any difference. Additionally, I would think
what your interests are, will affect what settings you find work the best
(DXing or ragchewing).
Dick, K8ZTT
From: Don Wilhelm <[email protected]>
To:
Cc: "[email protected]" <[email protected]>
Sent: Saturday, February 11, 2017 8:45 PM
Subject: Re: [Elecraft] K3S and Heil PR10
The real bottom line is to use the indication on the K3 (K3S, KX3 and
KX2) ALC meter.
If you are driving the voice audio up to the 5 to 7 bars level, that is
correct. If it is going higher reduce the MIC gain or switch to the low
mic gain setting.
If it is lower than the 5 to 7 bars, increase the mic gain or switch to
the high mic gain range.
73,
Don W3FPR
On 2/11/2017 10:28 PM, RIchard Williams wrote:
> Tom,
>
> I would use whatever setting works the best; if you are receiving good
> audio reports, "leave sleeping dogs lie". If your mic gain is set at
> something reasonable (mine is "9"), I wouldn't worry about what is
> "suggested". Too many variables with your voice characteristics; if
> you are calling a "P5" for an ATNO, you might be speaking a bit louder
> than working a JA for the 300th time.
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
