Just as another observation... My Low Cut on SSB in Norm I is set to
0.015 by default. I can dial it UP by 0.1, 0.25, 0.35, etc.
OR, if I dial it down to 0.05 as long as the starting point is above
0.05. Cannot dial in 0.05 from 0.00.
______________________
Clay Autery, KY5G
(318) 518-1389
On 30-Jun-18 23:31, Jack Brindle wrote:
Yup, you are right. The manual clearly states that PB CTRL only affects CW and
Data modes, and shifts the increment between 0.05 and .01 KHz.
It appears to be fixed at .1 KHz for SSB for both low and hi cut. Those
increments work pretty well as is.
73,
Jack, W6FB
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
