Scratching my head. I was making Q's on FT8 with my K3 and WSJT-X, v2.0.1 when I no longer would get power out.
WSJT is keying the K3 (Red transmit light is on) but no power out. The K3 keys fine with power out in CW or other modes is fine. WSJT is talking to the K3. WSJT shows the correct frequency, it is decoding and when I go into Settings > Radio and hit Test CAT it goes green. When I hit TUNE on WSJT it turns to red and the red TX light on the K3 comes on. But no power out. The typical setup is LP-Bridge, DXBase, DXBridge, WSJT-X. Yes, I know I need to update to DXLab to properly interface. So I closed everything but WSJT-X and have it talking directly to the K3. No difference. Also using the USB interface on the K3. Any ideas what could have happened and any suggestions? Maybe I bumped something? N2TK, Tony ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
