I run into this over and over with Windows 10, and I'm embarrassed to
say I often don't know what makes the difference. I use the microphone
input and speakers output on an outboard USB sound card, and generally
find myself just dinking around with the various sound settings until I
find something that causes it to start working. My suspicion is that
Windows 10 update has a nasty habit of resetting audio arrangements to
some arbitrary set of "defaults."
73, Pete N4ZR
Check out the Reverse Beacon Network
at <http://reversebeacon.net>, now
spotting RTTY activity worldwide.
For spots, please use your favorite
"retail" DX cluster.
On 11/13/2019 8:10 AM, N2TK via Elecraft wrote:
Don,
Tnx for the reminder on checking the audio on the ALC meter. It was so long since I had
a problem I forgot about doing that. There was no audio shown on the K3. What happened
is that in WSJT-X > Settings > Audio > Soundcard, The OUTPUT was no longer
Speakers (USB Audio CODEC). Somehow it changed to SPEAKERS (Realtek High Definition
Audio), which is my audio for my pc. Changed it to what it was supposed to be and now I
am fine. I have no idea what changed the setting as I was working station after station
when this happened.
Weird.
73,
N2TK, Tony
-----Original Message-----
From: Don Wilhelm <[email protected]>
Sent: Wednesday, November 13, 2019 7:40 AM
To: [email protected]; [email protected]
Subject: Re: [Elecraft] K3 - WSJT-X help
Tony,
Soundcard problem or K3 problem. This is most commonly a problem with audio
into the K3.
How many bars illuminate on the ALC meter? It should be 4 with the 5th bar
flashing. If not, look at the audio levels.
See the article on my website www.w3fpr.com
73,
Don W3FPR
On 11/13/2019 7:04 AM, N2TK via Elecraft wrote:
Scratching my head. I was making Q's on FT8 with my K3 and WSJT-X,
v2.0.1 when I no longer would get power out.
WSJT is keying the K3 (Red transmit light is on) but no power out. The
K3 keys fine with power out in CW or other modes is fine. WSJT is
talking to the K3. WSJT shows the correct frequency, it is decoding
and when I go into Settings > Radio and hit Test CAT it goes green.
When I hit TUNE on WSJT it turns to red and the red TX light on the K3 comes
on. But no power out.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
