Tony,
Soundcard problem or K3 problem. This is most commonly a problem with
audio into the K3.
How many bars illuminate on the ALC meter? It should be 4 with the 5th
bar flashing. If not, look at the audio levels.
See the article on my website www.w3fpr.com
73,
Don W3FPR
On 11/13/2019 7:04 AM, N2TK via Elecraft wrote:
Scratching my head. I was making Q's on FT8 with my K3 and WSJT-X, v2.0.1
when I no longer would get power out.
WSJT is keying the K3 (Red transmit light is on) but no power out. The K3
keys fine with power out in CW or other modes is fine. WSJT is talking to
the K3. WSJT shows the correct frequency, it is decoding and when I go into
Settings > Radio and hit Test CAT it goes green. When I hit TUNE on WSJT it
turns to red and the red TX light on the K3 comes on. But no power out.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
