Download the K3 Assembly Manual. I believe they just plug in. Sent from my iPhone ...nr4c. bill
> On Jan 26, 2020, at 10:50 PM, Gary K9GS <[email protected]> wrote: > > Hello Don,How difficult is it to replace the encoders? Is there a document > that describes the procedure?73,Gary K9GS > -------- Original message --------From: Don Wilhelm <[email protected]> > Date: 1/26/20 8:15 PM (GMT-06:00) To: Gary K9GS <[email protected]>, > [email protected] Subject: Re: [Elecraft] VFO B dead Gary,If you are > not afraid of disassembling your K3, remove the Front Panel assembly and swap > the encoder A with encoder B. If the problem follows the encoder, then order > a new encoder from Elecraft. If that is not the problem, contact > [email protected] for additional checks.73,Don W3FPROn 1/26/2020 5:34 PM, > Gary K9GS wrote:> I just had my K3 in for service and a checkup. I REALLY > hope I can avoid sending it in again. The VFO B knob is completely dead. > Turning it does not tune VFO B. Also tried the config screen...same thing.I > suspect the encoder is bad but it showed no symptoms prior..otherwise I would > have had it changed out when I sent it in.All other front panel functions > appear to work.Any ideas?73,Gary K9GS > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
