...and the first thing to check is that one of them hasn't come unplugged!
73,
Victor, 4X6GP
Rehovot, Israel
Formerly K2VCO
CWops no. 5
http://www.qsl.net/k2vco/
On 27/01/2020 6:38, Nr4c wrote:
> Download the K3 Assembly Manual. I believe they just plug in.
>
> Sent from my iPhone
> ...nr4c. bill
>
>
>> On Jan 26, 2020, at 10:50 PM, Gary K9GS <[email protected]> wrote:
>>
>> Hello Don,How difficult is it to replace the encoders? Is there a
document that describes the procedure?73,Gary K9GS
>> -------- Original message --------From: Don Wilhelm
<[email protected]> Date: 1/26/20 8:15 PM (GMT-06:00) To: Gary
K9GS <[email protected]>, [email protected] Subject: Re:
[Elecraft] VFO B dead Gary,If you are not afraid of disassembling your
K3, remove the Front Panel assembly and swap the encoder A with encoder
B. If the problem follows the encoder, then order a new encoder from
Elecraft. If that is not the problem, contact [email protected] for
additional checks.73,Don W3FPR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
