Barry,
Thanks. I was specifically wondering about entries on WSJT-X's Settings
> Radio page:
-- At the top of the page, is anything filled in for "Rig"?
-- The lefthand side of the page has the heading "CAT Control," so is
anything entered here (serial port, baud rate, data/stop bits, DTR/RTS,
etc)?
-- On the righthand side of the page, I assume "VOX" is selected as PTT
method. What choices are selected for Mode and for Split Operation?
Thanks again,
Frank
On 1/28/20 11:20 AM, Barry wrote:
Frank,
I use VOX for all of my digital operation to include AFSK, FT8,
and FT4. I really haven't done anything to the default setting that
came with the radio. I just set the line in to 20 and adjust the power
slider in WSJT-X to get the 4 bars with 5th flickering on the K3s's
ALC readout. Nothing fancy! One caution: watch your PA temperature. It
will definitely rise.
73,
Barry
K3NDM
------ Original Message ------
From: "Frank O'Donnell" <[email protected]>
To: "[email protected]" <[email protected]>
Sent: 1/28/2020 1:22:43 AM
Subject: [Elecraft] K3S, VOX and WSJT-X?
I've successfully used WSJT-X with my K3S for a fairly long time,
using a single USB cable for both audio transfer and CAT control.
Currently I'm interested in trying VOX in order to enable running
multiple instances of WSJT-X simultaneously on the same band (JT9 and
WSPR on 474.2 kHz, if it's of any interest). Could anyone who is
using VOX for WSJT-X with a K3/K3S tell me how they have the Settings
> Radio pane in WSJT-X configured? I can probably stumble my way
through, but some pointers would undoubtedly make faster progress.
Thanks and 73,
Frank K6FOD
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
