VOX is a lot easier to configure for digital modes than is is
for voice because, all the digital modes -- at least that I know
about -- are either on or off. None of them use different volume
levels to encode data. This means that you just have to find a
setting between zero volume and full volume, and it will work
well for keying the radio. If use VOX for voice, the same
setting should work for digital.
73 Bill AE6JV
On 1/29/20 at 9:59 PM, [email protected] (Don Wilhelm) wrote:
Although several others have had success with VOX, I find the
most reliable is to use PTT via CAT command. Set it in the
application and you will have no problem.
-------------------------------------------------------------------------
Bill Frantz | Airline peanut bag: "Produced | Periwinkle
(408)348-7900 | in a facility that processes | 150
Rivermead Rd #235
www.pwpconsult.com | peanuts and other nuts." - Duh |
Peterborough, NH 03458
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
