Frank,
Although several others have had success with VOX, I find the most
reliable is to use PTT via CAT command. Set it in the application and
you will have no problem.
If your problem is related to audio levels, refer to my website
www.w3fpr.com. Scroll the left column to the last article and click to
open the page. No matter whether you are operating from the transverter
mode or the normal antenna, you must have 4 bars solid with the 5th bar
flashing on the ALC meter.
73,
Don W3FPR
On 1/29/2020 9:35 PM, Frank O'Donnell wrote:
Bob,
First, let me back up and say that I'm operating with the K3S in
transverter mode on 630m with an external power amp. I've successfully
used CAT control with WSJT-X on a MacBook Pro to tx/rx JT9 and WSPR. My
objective now is to use the K3S in VOX mode with a Windows 10 desktop
running two instances of WSJT-X,
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
