Dave, While full instructions are not available from Elecraft, it is a simple matter to put the KPA100 and the KAT100 into an EC2 enclosure. The KAT100-2 has all the 'hooks' required to plug the KPA100 into the KAT100 board.
There are no mods required to mount the current KPA100 externally - the mods that you read about apply only to the initial KPA100 design, so if yours has been upgraded (if R23 and L18 are jumpers, you have the upgrade installed - the new kits have th upgrade integrated), all you need to do is plug it in once you complete the KAT100-2. 73, Don W3FPR > -----Original Message----- > > I see some hams have combined the KPA100 with the KAT100-2 in a separate > case. Is Elecraft planning on modifying these kits so they can be > assembled into > a case separate from the K2 without modifications? > > I love my K2 with all of its features, including the internal > battery. It > would be real handy to plug the radio into one module and have > the KPA100 with > the KAT100-2 available in the shack, while keeping the battery > powered K2 for > portable work. I am a little shy about applying someone else's > modifications > to my rig. > > If Elecraft is not planning on offering these kits in this form, > is there > someone's modifications that you would recommend? > > Thanks for your help. > > Dave, N2AWE > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
