Joe, I guess contradiction was a little strong ;-) I just wasn't sure if the later revs of the KPA100 eliminated the issue entirely.
I'm somewhat lazy as well and adhere to the KISS principal (most days) so I was leaning with not replacing it. But then again, I'm pretty conservative with regard to my equipment - so... Always good to have choices :-) Dave, W8FGu > -----Original Message----- > From: Joseph Reed [mailto:[EMAIL PROTECTED] > Sent: Saturday, November 11, 2006 6:46 PM > To: Dave Van Wallaghen; [email protected] > Subject: Re: [Elecraft] kpa100 with kat100-2 > > Dave, > > There isn't a contradiction between what Lyle and John describe. Lyle was > taking a conservative approach to the issue. Nothing wrong with that. > John did some extensive tests and found it wasn't necessary. Both > approaches are equally correct. > > Being lazy, and after reading John's test results I decided not to replace > L1. Eight months later I can say it wasn't necessary to replace L1. > > As in most things Elecraft, there are more than one way to skin the cat. > The fact that we are offered a number of choices to arrive at our desired > destination is a very good thing. > > Joe N9JR > > ----- Original Message ---- > From: Dave Van Wallaghen <[EMAIL PROTECTED]> > To: [email protected] > Sent: Saturday, November 11, 2006 1:26:04 PM > Subject: RE: [Elecraft] kpa100 with kat100-2 > > > Don, > > Just to clarify - does this include the mod to L1 on the KIO2 AUXBUS board > as explained on the KK7P web site? I found a contradiction to this mod on > KI6WX site. (Was or is there a possible current draw problem through L1)? > > Thanks in advance, > Dave, W8FGU _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
