Don, Just to clarify - does this include the mod to L1 on the KIO2 AUXBUS board as explained on the KK7P web site? I found a contradiction to this mod on KI6WX site. (Was or is there a possible current draw problem through L1)?
Thanks in advance, Dave, W8FGU > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:elecraft- > [EMAIL PROTECTED] On Behalf Of Don Wilhelm > Sent: Sunday, November 05, 2006 9:07 PM > To: [EMAIL PROTECTED]; elecraft@mailman.qth.net > Subject: RE: [Elecraft] kpa100 with kat100-2 > > Dave, > > While full instructions are not available from Elecraft, it is a simple > matter to put the KPA100 and the KAT100 into an EC2 enclosure. The > KAT100-2 > has all the 'hooks' required to plug the KPA100 into the KAT100 board. > > There are no mods required to mount the current KPA100 externally - the > mods > that you read about apply only to the initial KPA100 design, so if yours > has > been upgraded (if R23 and L18 are jumpers, you have the upgrade installed > - > the new kits have th upgrade integrated), all you need to do is plug it in > once you complete the KAT100-2. > > 73, > Don W3FPR > > > -----Original Message----- > > > > I see some hams have combined the KPA100 with the KAT100-2 in a > separate > > case. Is Elecraft planning on modifying these kits so they can be > > assembled into > > a case separate from the K2 without modifications? > > > > I love my K2 with all of its features, including the internal > > battery. It > > would be real handy to plug the radio into one module and have > > the KPA100 with > > the KAT100-2 available in the shack, while keeping the battery > > powered K2 for > > portable work. I am a little shy about applying someone else's > > modifications > > to my rig. > > > > If Elecraft is not planning on offering these kits in this form, > > is there > > someone's modifications that you would recommend? > > > > Thanks for your help. > > > > Dave, N2AWE > > > > _______________________________________________ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com