Hallo Lyle,
> With the 6 kHz roofing filter, you should be able to set HI CUT to
> 3 kHz in AM mode.
I do not have my radio here, so from memory:
With the 6kHz filter it was not possible to set bandwidth greater than
2.8kHz and/or Hi/lo cut to 3000Hz and 200Hz using the knobs. Using the
XFIL button 6kHz appeared to be reachable but no bandwidth between 6kHz
and 2.8kHz.
If the 3kHz you mention is equal to 6kHz RF bandwidth (is equal to 3kHz
AF bandwidth?), then I would suggest displaying the RF and not the AF
bandwidth. It might become confusing when one wants to shift the filter
to listen mainly to one side band; On a clear channel with say 4kHz or
when avoiding interference with 2kHz.
vy 73 de toby
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
