Lately it seems that most CW DX stations I have worked are listening up 1 or 2. Of course, for SSB they would want the bigger split of "up 5" or so.
By changing the "UPB" value in those macros (which I had a little off) you can change the split. For example: SWT13;SWT13;FT1;UPB5;RT0;XT0; will give you "Up 2" and for the wider SSB split: SWT13;SWT13;FT1;UPB7;RT0;XT0; yields "Up 5" If you then push the Split button twice it will unset the Split and re-equalize the VFO's BTW, These Macros are copied or derived from the examples in the "K3 Programmers Reference" Rick K6LE On 4/11/2010, at 3:03 , Gary Gregory wrote: > Ken, > > Mostly I here "listening up 5" or sometimes "listening up 5 to 10" etc. I > must be missing the "listening up 2" thing. > > While we are on this topic, I have an alternate frequency set on VFO B on > each band, pressing SPLIT means I usually have a lot of winding to do so I > have been using the XIT/RIT for split use. > > If the "Up 2" option is to be used, would cancellling the SPLIT return VFO B > to my alternate frequency? > > If it does then I see a good use for me. > > FWWIW > > Gary > VK4FD ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
