>I'm sure this has been addressed countless times on this list, so >apologies for asking again. Has anyone on this list composed a FAQ on >moving to OS X and keeping Claris Emailer working? I'm about to take the >big leap from a beige G3/OS 8.6 to a new G5/OS X. As a total novice in >OS X, I need to know the baby stuff about how to copy over the CE files, >and especially where to stash them in OS X, etc.
Humm... ok, I'll take a stab at an Emailer in Classic FAQ -Start of FAQ- 1. Start Emailer -End of FAQ- Um... that's about it. Emailer just works in Classic. No fuss no muss. (ok, I over simplified, there are a few minor issues... PPP Dialup connections cause Emailer to fail to collect email on the pass that caused the PPP to dial. Once the connection is established, or if you don't use PPP (ie: have DSL or Cable), then it just works. Also, if you copy the Emailer folder to or from an OS X drive, .DS_Store files can appear in all the Emailer folders... when located in the Temp Incoming folder, this causes Emailer to have unpacking problems with new messages. To cure it, simply make sure the Temp Incoming folder is empty, then throw it out. Close all open windows, and start Emailer. Problem will be solved.... other than those two points, I'm not sure there are any Classic/OS X issues with Emailer) -chris <http://www.mythtech.net> ___________________________________________________________________________ To unsubscribe send a mail message with a SUBJECT line of "unsubscribe" to <[EMAIL PROTECTED]> or <[EMAIL PROTECTED]>
