You should see the port the printer is connected to appear when you slewct the printer in Chooser. If you dont then its not chosen.
Regards Neville > >>In Classic you must make sure that you have the correct drivers properly >>installed in the OS 9 System Folder, so maybe do a reinstall of the Mac >>OS 9 drivers for your printer and then you should be able to select it in >>the Chooser. There is no reason you are unable to print unless the >>drivers are not installed correctly otherwise something very odd is going >>on. > >Thanks to everyone for your great responses - I have still had no luck >and am not sure what is wrong. > >Originally I had clean installed from my Epson R300 (relatively recent >model) CD for both OSX and OS9 and gone to the chooser and made sure all >extensions were turned on, etc - but to be frank, Emailer won't print >from my iMac either! I have compared my original 9.2.2. system folder >(which printed from CE when it was installed alone on my laptop) with the >one now installed under Classic and it looks like everything necessary is >there although I have turned off alot of extensions that don't Including >something called: "High Sierra File Access" among other strange sounding >units. > >So I tried downloading the driver from the site, just in case. And still >nothing. I go to the Chooser each time and select the only printer >there. It does not move into the space on the right when I do if that >means anything. (It doesn't on my iMac either.) And the spooling window >spools and then absolutely nothing. (Originally I was getting an error >message. > >> >>If this is an OS 9 bootable computer, go back to that and make sure the >>printer works there, > >I don't believe it is - I have not partitioned the HD. > >My computer is set up for file and printer-sharing on OSX (through an >ethernet/router) and OSX prints very nicely with the printer plugged into >the iMac or the laptop. > >___________________________________________________________________________ >To unsubscribe send a mail message with a SUBJECT line of "unsubscribe" to ><[EMAIL PROTECTED]> or <[EMAIL PROTECTED]> > ___________________________________________________________________________ To unsubscribe send a mail message with a SUBJECT line of "unsubscribe" to <[EMAIL PROTECTED]> or <[EMAIL PROTECTED]>
