I pushed on the 24th to the 2.5 docs and it showed up within an hour or two.
Everything except 2.4 docs are merge up from the branch. For 2.4 docs you must push to the 2.4 branch the .lyx change and for 2.5 docs you must push the .txt change to the 2.5 branch. I'm unsure about the state of the latexmath but I though I saw a fix for that somewhere. I can look into why so much is missing from the PDF's this weekend. John On 10/26/2011 12:15 PM, Jon Elson wrote: > John Thornton wrote: >> There is a link on the documents page to the 2.5 html docs which seem to >> be getting built as changes are made. >> >> http://www.linuxcnc.org/docview/2.5/html/ >> >> > And, it apparently is NOT working, or did not get updated. If you look at > the HAL manual / Pico PPMC Driver / 2. Parameters and scan down to > ppmc.<port>.stepgen.<channel-range>.pulse-space-min > > It reads : > — Sets minimum time between pulses, in units of 100ns. The maximum step > rate is Applies to a group of four consecutive step generators, as > indicated by<channel-range>. > > Now, where it says the max step rate is, there is supposed to be a > fraction there, which > would appear in the PDF files, except the entire section about hardware > drivers is not > being included in the PDF build right now. The code for the fraction is > in the > asciitext file, and looks like this : > latexmath:[[\frac{1}{ ( 100ns * ( `pulse-width` + `pulse-space-min` )) } > \]]. > > Your other layout may be better, but I'm a LOT more concerned with just > getting > the document info built right now. If this docview link you give above is > really being rebuilt, then the latexmath part is STILL NOT WORKING for the > html version, and > a number of important documents are seriously affected by the missing > formulas. Some of the docs on motion control are entirely unreadable. > > Also, the PDF docs are missing a HUGE section of hardware driver doc > pages that are present in the git docs tree, > > Jon > > ------------------------------------------------------------------------------ > The demand for IT networking professionals continues to grow, and the > demand for specialized networking skills is growing even more rapidly. > Take a complimentary Learning@Cisco Self-Assessment and learn > about Cisco certifications, training, and career opportunities. > http://p.sf.net/sfu/cisco-dev2dev > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers ------------------------------------------------------------------------------ The demand for IT networking professionals continues to grow, and the demand for specialized networking skills is growing even more rapidly. Take a complimentary Learning@Cisco Self-Assessment and learn about Cisco certifications, training, and career opportunities. http://p.sf.net/sfu/cisco-dev2dev _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
