On Sunday 17 May 2015 09:07:37 John Thornton wrote: > I have Ubuntu 10.04 with LinuxCNC 2.6 running 24/7/365 on two machines > and they have never locked up. The only time they go down is when they > don't have power... > > I have Ubuntu 10.04 on one computer that locks up but that is a > motherboard issue and sometimes I can fix it with my air blower to > cool and blow the shop dust off the MB. At first I could blow the MB > off and the desktop computer would stay on for a month or two but in > the end it would lock up and shut down too often to continue trying to > use it... > > JT
These things are high on a shelf and generally well out of the shop dirt and will be quite close to lox clean when they are pulled off the shelf. BTDT, 2-3 times already. That box gets a 5i25 & a new motor PSU at nearly twice the volts 28 -> 48 in another month, maybe less if it gets to be a totally unusable PIMA. That and these polygroove spindle drive parts should make the box joints for 3 more of those G&G style blanket chests about 4x faster to carve. The code is behaving, so thats next on todays agenda. Thanks John. > > On 5/17/2015 7:54 AM, Gene Heskett wrote: > > Hello all; > > > > I didn't mention in recent msgs to users, but I am now convinced it > > is LCNC that is doing the crashing, it is still the old 10.04-4 LTS > > on the milling machine, and it went away 3 times yesterday while I > > was sharpening a tool to do the polygroove pulleys with. Screen > > border clock stops, no mouse pointer, no response from the keyboard, > > and any ssh -Y sessions into it from this machine are closed. And > > always when I had walked away to do something else, leaving it idle > > but running. > > > > The box runs normally for days, even months, IF LCNC isn't running. > > If I wasn't tied up trying to make pulleys for its head on this > > lathe with its lemon merangue parts, I'd put the newer dvd on it, > > and switch to 2.8.0-pre, which has given zip trouble on the lathe > > despite the screen blanker animations being in full force on the > > lathes install. > > > > I might have to take a break and do it anyway... I will try an > > xset -dpms just for S&G first though. I haven't managed to remember > > to do that, yet. > > > > Cheers, Gene Heskett > > ---------------------------------------------------------------------- >-------- One dashboard for servers and applications across > Physical-Virtual-Cloud Widest out-of-the-box monitoring support with > 50+ applications Performance metrics, stats and reports that give you > Actionable Insights Deep dive visibility with transaction tracing > using APM Insight. > http://ad.doubleclick.net/ddm/clk/290420510;117567292;y > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
