I am not shilling their services but the recent TUV Rheinland newsletter has
a handy transition date table for the EN60950/60065/61010 standards

Here is the link 

http://www.us.tuv.com/news/newsletter_pdfs/TUV_WN_JanFeb04.pdf

Please note that it is heavy on color graphics so if you click on the link
using a 56K modem it may take a while to load so be advised.....





From: John Woodgate [mailto:[email protected]] 
Sent: Wednesday, January 28, 2004 2:17 PM
To: [email protected]
Subject: Re: Australian DOW and 60950 3rd ed.



I read in !emc-pstc that Ron Pickard <[email protected]> wrote (in
<of36f07a98.32d4c909-on07256e29.0052c0c3-07256e29.00558...@hypercom.com>
) about 'Australian DOW and 60950 3rd ed.' on Wed, 28 Jan 2004:
>But, as the xxx60950 series of standards are being replaced with the
>xxx60950-1 series of standards, it may be prudent to investigate to 
>xxx60950-1 to which I believe most safety agencies are now 
>investigating.

They are, but in Europe the previous issue EN 60950:2000 is acceptable up to
2006-07-01, so there is a choice to be made, depending on product
life-cycles and timings, and on which standard is easier to meet.
-- 
Regards, John Woodgate, OOO - Own Opinions Only. 
The good news is that nothing is compulsory.
The bad news is that everything is prohibited. http://www.jmwa.demon.co.uk
Also see http://www.isce.org.uk 


This message is from the IEEE EMC Society Product Safety Technical Committee
emc-pstc discussion list.

Visit our web site at:  http://www.ieee-pses.org/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    http://www.ieeecommunities.org/emc-pstc


This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ieee-pses.org/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    http://www.ieeecommunities.org/emc-pstc

Reply via email to