I read in !emc-pstc that Kevin Richardson <[email protected]> wrote (in <[email protected]>) about 'Australian DOW and 60950 3rd ed.' on Thu, 29 Jan 2004: >Primarily because there is no Australian equivalent specific to AC/DC >adapters etc. AS/NZS 60950 is 1 of a couple of standards which may be >applied. 60950 is usually applied, particularly where the adapter is >used with IT type equipment, because it is readily applicable to this >type of device also.
I expected so. But if you compare the proper standards with 60950, there are differences which may well be justified. -- Regards, John Woodgate, OOO - Own Opinions Only. The good news is that nothing is compulsory. The bad news is that everything is prohibited. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
