http://www.ieee-pses.org/symposium http://www.emc2004.org/
I read in !emc-pstc that Scott Douglas <[email protected]> wrote (in <[email protected]>) about 'standards quoted on EU D of C' on Mon, 12 Jul 2004: > I would like to agree with you in principal, but I have a problem > doing it in practice. When we sent our CB reports to other > countries to get our products approved there, some agencies told us > that the report had to list IEC 60065 and not EN or UL 60065. Then > we also had to make sure the country specific deviations were > included. So while in theory you are right about being able to use > any method as long as you document it, in practice some other > country agencies will not accept the practice. At least from my > limited experience. CB is a scheme operated by the IEC. I don't think you can have a true 'CB Report' that cites standards other than IEC. More info at www.iec.ch -- Regards, John Woodgate, OOO - Own Opinions Only. The good news is that nothing is compulsory. The bad news is that everything is prohibited. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. IEEE PSES Main Website: http://www.ieee-pses.org/ To post a message send your e-mail to [email protected] Instructions for use of the list server: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
