http://www.ieee-pses.org/symposium http://www.emc2004.org/ -------------------------------------------------- http://www.ieee-pses.org/symposium http://www.emc2004.org/ --------------------------------------------------
I will assume that you submitted your product to UL for evaluation under UL 60065 along with the CB Scheme. If this is correct the product was evaluated to IEC 60065 with the national deviations for the US, hence UL 60065. Being that UL 60065 is not covered by the LVD you would not be permitted to include in the DofC. You need to make sure that the CB report covers the appropriate EU deviations per EN(BS) 60065. Hope this helps, David Cereceres Regulatory Engineer Safety & Environmental Pelco 3500 Pelco Way Clovis, CA 93612 Phone: 559.292.1981 ext.3493 Pax: 559.294.3707 [email protected] www.Pelco.com <http://www.pelco.com/> ================ Confidentiality Note: The information contained in this transmission is legally privileged and confidential, intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you receive this communication in error, please delete the message and notify us immediately by telephone call to +1-559-292-1981. ================ From: [email protected] mailto:[email protected]]On Behalf Of James, Chris Sent: Monday, July 12, 2004 9:37 AM To: [email protected] Subject: standards quoted on EU D of C If a product has been CB certified by UL, using UL60065 for LVD, is it valid and permissible to quote UL60065 on an EU declaration of conformity? Regards, Chris ____________________________________________________ Chris James Engineering Services Manager Dolby Laboratories, Inc. _____ This message (including any attachments) may contain confidential information intended for a specific individual and purpose. If you are not the intended recipient, delete this message. If you are not the intended recipient, disclosing, copying, distributing, or taking any action based on this message is strictly prohibited. ------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. IEEE PSES Main Website: http://www.ieee-pses.org/ To post a message send your e-mail to [email protected] Instructions for use of the list server: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. IEEE PSES Main Website: http://www.ieee-pses.org/ To post a message send your e-mail to [email protected] Instructions for use of the list server: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
